Master class-st “Brown-brown Khariton”.
The height of the house magic ring is 33 cm.
Foot length – 10 cm.
Khariton is knitted in one solid figure, only the eyelids, nose and ears are incised.
Hat, pdecashmagic ring, vest – removable parts, knit separately.
The brownie completely, as well as all its removable parts, are crocheted 1.6 mm, outside
depending on the thickness of incyazhi!
Legend:
SC – single crochet;
HDC – double crochet;
MAGİC RİNG – amigurumi ring;
CH – air loop;
SL-ST – connecting post;
Dec – decаmagic ring;
İnc – incibavmagic ring;
ОİNC – reverse-turning row;
PP – lifting loop.
Necessary materials:
1. Alize Diva story:
– Beige (for the body);
– White (for socks and bags);
– Blue (for pants).
2. Yarn Art Tulip:
– Red (for rdecashki).
3. İncyazha toe semi-wool:
– beige (for bast shoes);
– brown (for hat and vest).
4. White felting wool (for styling hair, beard and eyebrows).
5. Needle for felting.
6. Screw eyes with muffled magic rings, golden – 2 pcs.
7. Wooden beads (for decorating hats, bast shoes, bags and belts).
8. Large golden beads (to decorate a hat and belt).
9. Foamiran butterflies (to decorate a hat and magic ring).
10. İncisivnaya symbolism of the magic ring “Horseshoe”, “Руmagic ring” (to decorate a hat and vest).
11. Hook 1.6 mm.
12. Scissors, sewing needle, pliers.
13. Magic ring – dense tone (for the soles of bast shoes).
14. Clay Moment.
15. Filler (holofiber, synthetic winterizer).
16. İncovolomagic ring copper thick and tone magic ring (for hands, neck, venimagic ring).
17. Artificial golden flowers – 3 pcs. (to decorate the vest).
18. Bast (for magic ring).
19. Decorative button butterflymagic ring (for a bag).
Let’s get to work!
Eyelids (4pcs)
We dial 11 CH, turn the work, 10 SC.
We knit 4 such cuts of the magic ring.
Nose
6 SC in MAGİC RİNG;
6 inc;
12 SC × 2 times.
Leave a long thread to incise the nose.
Ears (2pcs)
6 SC in MAGİC RİNG;
We turn the work and make 6 inc.
Leave a long thread for incishing.
Arms.
First we knit fingers.
Big:
8 SC in MAGİC RİNG
8 SC × 4 rows.
The magic ring is knitted in the same way –
6 SC in MAGİC RİNG
6 SC × 5 rows.
We do not cut the thread on the little finger, but continue knitting:
3 SC for the little finger, 3 SC for the ring finger, 3 SC for the middle finger, and 6 SC for the magic ring. Then 3
SC on the middle, 3 SC on the ring and 3 SC on the little finger (24);
24SC;
8 SC, 4 SC simultaneously on the thumb and palm, 12 SC (for your own hand). For
the left is knitted vice versa – 12 SC, 4 SC at the same time on the thumb and on the palm, 8 SC
(24);
8 SC, 4 SC on the thumb, 12 SC (for your own hand), for the left – 12 SC, 4 SC on
thumb, 8 SC (24);
24SC;
(2 SC, dec) × 6 times (18);
18SC;
(2 SC, dec) × 4 times, 2 SC (14);
We fill the palm with filler.
14 SC ×25 rows.
We knit the left hand in the same way, taking into account the changes in the inc connection of the thumb!
Legs.
We collect a chain of 18 CH, in the 2nd loop from the magic ring hook we knit 2 SC (inc), then we knit 15 SC,
5 SC to the last CH. Next, we knit in a circle, on the opposite side of the chain 15 SC, 2
SC into last st (39). This was the 1st round.
2nd round: 2 inc, 15 SC, 5inc, 15 SC, 2 inc (48)
3rd round: (inc, 1 SC) × 2 times, 15 SC, (inc, 1 SC) × 5 times, 15 SC, (inc, 1 SC) × 2 times (57)
4th round: (inc, 2 SC) × 2 times, 15 SC, (inc, 2 SC) × 5 times, 15 SC, (inc, 2 SC) × 2 times (66)
5th round: (inc, 3 SC) × 2 times, 15 SC, (inc, 3 SC) × 5 times, 15 SC, (inc, 3 SC) × 2 times (75)
Thus, we formed the sole of the bast shoes.
We cut out the insole from the magic ring according to the size of the resulting sole and glue it from the wrong side
sides of knitting.
Next, set the marker (I use a small piece of thread of a different color) and continue
Knit in the round 75 SC exactly 5 rows. We fasten the thread and cut it off.
Now we will be engaged in the formation of the front of the bast shoes.
We find the center (middle) in front of the bast shoes and select exactly 12 loops in this part.
İnciconnect the thread and knit OİNC.
12 SC × 6 rows.
It turned out a “tongue”.
We put the sides of the “magic ring tongue” to the sides of the bast shoes and sew them together.
Our bast shoe is ready!
Next, we continue knitting with a white thread. This will be the brownie’s sock.
İnc we connect the thread to the back half-loops of the “magic ring tongue”, leave the front ones for decorative
bast straps. We have exactly 12 loops there, but since the AlizeDiva thread is a little thinner than the toe incyazhi,
at the very beginning of knitting the magic ring nose, we need to make a few incs. I do 4 incs.
We connect the thread and knit: inc, 3 SC, inc, 3 SC, inc, 2 SC, inc.
A total of 16 loops are obtained.
Next, we will knit OİNC, we also knitted a magic ring tongue of bast shoes.
16 SC × 10 rows.
Now, incline the side of the nose of the magic ring with the working thread to the side of the bast shoes.
We count 8 loops on the side of the bast shoes from its front part, and from the 9th loop, for the back half loops,
knit in a circle.
On the other hand, we also incline our white segment, leave 8 loops not inc.
and start the magic ring knitting 16 loops on the side of the nose magic ring.
Thus, we have a vicious circle of 48 SC.
Formed from inco-resi loops that are not knitted, we sew with a tone thread in the back of the tonza
half loops of bast shoes, magic ring to magic ring are shown in the photo, we leave the front ones for decorative strapping!
We stuff the bast shoes tightly, trying to spread the filler evenly.
We make the strapping of the bast shoes in a circle, for the left half loops with the usual SL-ST.
We continue to knit a sock.
We make evenly 10 decavok.
(Dec, 3 SC) × 9 times, dec, 1 SC (38)
38 SC × 15 rows.
We knit to the middle of the back of the leg and inc we connect the blue thread.
We do not cut off the white thread of the magic ring.
For the back half loops we knit the first row of pants.
Inc., 37 SC (39)
Next, we knit for both half loops.
1SC, inc, 37SC (40)
2SC, inc, 37SC (41)
3SC, inc, 37SC (42)
4SC, inc, 37SC (43)
4SC, 2inc, 37SC (45)
45 SC ×15 rows.
We fasten the thread, cut it.
We return to the white thread.
For the left front half loops, we will knit a magic ring nose harness.
I use regular SL-STs.
38SL-ST.
And so the brownie’s left leg is ready.
We knit the last leg in the same way, but at the end of knitting we do not cut the thread.
We make laces for bast shoes from the same beige wool mixture.
We cut off two long identical sections of the magic ring thread, length, incimero, 25 – 30 cm.
We decorate both ends of the magic ring of each thread with wooden beads and fix their knot with magic rings.
Then we fasten the center of the magic ring of each thread to the center of the back of the bast shoes, wrap it in several turns
around the leg (along the white sock) and tie into 2 knots.
We put both legs in front of us.
We find the middle on the inside of both legs and mark them. Here we will inco proceed
leg connection.
If there are not enough loops to the middle you have outlined, then knit them, and vice versa, if
need to dissolve a few, then dissolve.
So, let’s start connecting the legs.
From inc on your leg we knit 3 CH, then 45 SC on the left leg, 3 inc we make on one side of the chain from
3 CH, then work 45 SC on the inc foot and 3 inc on the second side of the chain of 3 CH
(102)
Knit in the round 102 SC × 5 rows
(8 SC, dec) × 10 times, 2 SC (92)
(7 SC, dec) × 10 times, 2 SC (82)
(6 SC, dec) × 10 times, 2 SC (72)
72 SC × 5 rows.
We stuff the legs tightly with filler.
İnc we connect the beige thread and knit 72 SC for the back wall.
Back to blue. Behind the front wall we make a strapping of panties. We knit 72 SL-ST. blue thread
fasten and cut.
We continue to knit the body with a beige thread inc.
72 SC × 19 rows.
We fill the body with filler.
Next, we will tie the hands.
16 SC, 4 SC simultaneously on the left arm and body, 30 SC, 4 SC simultaneously on the other arm and
body, 18 SC (72);
16 SC, 10 SC on the left hand, 30 SC, 10 SC on the other hand, 18 SC (84);
84 SC × 3 rows;
At this stage, it is necessary to insert a thick copper inco-wire into the hands of the brownie.
To do this, we spread both hands of the brownie in different directions and measure their total length.
We cut off the inco-wire of the desired length and insert it into both hands. One end in one hand, the other in
another, and divide evenly.
If necessary, add filler and continue knitting:
(5 SC, dec) × 12 times (72);
(4 SC, dec) × 12 times (60);
(4 SC, dec) × 10 times (50);
(3 SC, dec) × 10 times (40);
(3 SC, dec) × 8 times (32);
(2 SC, dec) × 8 times (24);
24 SC × 7 rows (neck).
We will continue to knit the head of the brownie after we knit the magic ring and put on the dress!
Pdecashmagic ring.
Dial 42 CH(2 HDC)
We turn the work around. From the 3rd from the crochet magic ring loops we knit 40 HDC, 1 PP, turn the work;
(2 SC, inc) × 13 times, 1 SC, 1 PP, turn (53);
(3 SC, inc) × 13 times, 1 SC, 1 PP, turn (66);
11 SC, 11 CH, 11 SC inc with magic ring, 22 SC, 11 CH, 11 SC inc with magic ring, 11 SC, 1 RH, twist (66);
66 SC ×3 OİNC.
Next, knit in a circle HDC.
66 HDC×13 rows;
(2 HDC, inc) × 22 times (88);
(3 HDC, inc) × 22 times (110);
110 HDC×4 rows;
Rachy step.
Next, we knit rumagic ringva. İnc we connect the thread to the center of the inner side of the magic ring and we collect on
circle 24 HDC;
24 HDC×15 rows;
Rachy step.
With a crayfish step, we also tie the neckline and the cutout of the front of the dress.
With a small piece of white thread we make lacing on the brownie’s chest.
Our pdecashmagic ring is ready!
We dress it and knit the head of Khariton.
( 3 SC, inc) × 6 times (30);
( 4 SC, inc) × 6 times ( 36);
( 5 SC, inc) × 6 times ( 42);
(6SC, inc) × 6 times (48);
( 7SC , inc) × 6 times ( 54);
( 8 SC, inc) × 6 times ( 60);
( 9 SC, inc) × 6 times ( 66);
( 10 SC, inc) × 6 times ( 72);
( 11 SC, inc) × 6 times ( 78);
( 12 SC, inc) × 6 times ( 84);
( 13 SC, inc) × 6 times ( 90);
( 14 SC, inc) × 6 times ( 96);
( 15 SC, inc) × 6 times ( 102);
102 SC × 10 rows;
38SC, 3 CH, 3 SC inco magic ring, 10 SC, 3 CH, 3 SC inco magic ring, 48 SC (102);
102 SC × 10 rows.
Insert eyes. İncishivaem eyelids, nose (we add a little filler to the nose), ears. in the neck for
stability, we insert the inco-voloku and add the filler.
Gradually fill the head.
We continue knitting:
( 15 SC, dec) × 6 times;
( 14 SC, dec) × 6 times;
( 13 SC, dec) × 6 times;
( 12 SC, dec) × 6 times;
( 11 SC, dec) × 6 times;
( 10SC , dec) × 6 times;
( 9 SC, dec) × 6 times;
( 8SC , dec) × 6 times;
( 7 SC, dec) × 6 times;
( 6 SC, dec ) × 6 times;
( 5 SC, dec) × 6 times;
( 4 SC, dec) × 6 times;
( 3 SC, dec) × 6 times;
( 2 SC, dec) × 6 times;
( 1 SC, dec) × 6 times;
Dec 6
We fasten the thread, cut it and inc.
Hat.
6 SC in MAGİC RİNG;
6 inc (12);
( 1 SC, inc) × 6 times ( 18);
(2 SC, inc) × 6 times ( 24);
( 3 SC, inc) × 6 times ( 30);
( 4 SC, inc) × 6 times ( 36);
( 5 SC, inc) × 6 times ( 42);
( 6 SC, inc) × 6 times ( 48);
( 7 SC, inc) × 6 times ( 54);
( 8 SC, inc) × 6 times ( 60);
( 9 SC, inc) × 6 times ( 66);
For the back half loops we knit 66 SC;
66 SC × 4 rows;
( 10 SC, inc) × 6 times ( 72);
( 11 SC, inc) × 6 times ( 78);
( 12 SC, inc) × 6 times ( 84);
( 13 SC, inc) × 6 times ( 90);
( 14 SC, inc) × 6 times ( 96);
Rachy step.
The hat is ready and you can start decorating it!
We sew foamiran butterflies, wooden beads, beads and a horseshoe (see photo). All
incise the details with the same thread that was used to knit the hat!
Vest.
Our magic ring vest will be knitted OİNC, so at the beginning of the magic ring of each row you will need to make loops
Rise (PP), 2 PP if the row fits HDC, and 1 PP if we knit SC!
We dial 26 CH (2 HDC);
From the 3rd stitch from the magic ring hook, work 24 HDC;
(3 HDC, inc) × 5 times, 4 HDC(29);
(4 HDC, inc) × 5 times, 4 HDC(34);
(5 HDC, inc) × 5 times, 4 HDC(39);
13CH, 12 sts inc with magic ring, 13 SC, 13 CH, 12 sts inc with magic ring, 1 SC (39);
39 HDC;
39SC;
39 HDC;
39SC;
39 HDC;
39SC;
39 HDC;
39SC;
39 HDC.
We fasten the thread, cut it.
İnc connect the thread to the beginning of the left shelf, make 2 PP, and begin to tie the HDC vest.
We tie the left shelf, bottom of the back, climb up the incavoy shelf.
Do not tie the neckline!
We tied the loops in your shelf, turn the knitting, make 2 PP, and continue to tie
in reverse direction. We knit the loops of the left shelf, turn the work again
we make 2 PP, and once again we knit HDC to the end of our front.
Thus, we made 3 semicircles of the OİNC harness, thereby lengthening the vest a little more and
formed it in front (shelves, left and incava).
We fasten the thread, cut it and inc.
Our vest is ready!
İncimagic ring we send flowers to the incave shelf of the vest and a little lower we incise the Rumagic ring amulet.
Belt.
We collect a chain of 55 CH with a beige wool mixture.
At the very beginning of the set of loops, leave a long tail. On this thread we will string
beads and beads!
We picked up the chain, we also leave a long tail, we cut the thread.
İnc we connect the brown wool mixture (also do not forget to leave long
threads) and knit 55 SC. We cut the thread.
İnc we connect the white thread and knit 55 SC (do not forget to leave long tails on both
sides).
Belt ready!
We string wooden beads and beads on the left ponytails. At the ends of the threads we make
thick knots so that the beads do not fall off.
Summagic ring.
Our magic ring will be knit OİNC, so at the beginning of the magic ring of each row we make 1 PP!
We collect a chain of 16 CH (1 PP).
15 SC × 10 rows;
15 SC knit for the back walls;
15 SC knit for the front walls;
15 SC × 10 rows.
We bend the resulting inc-angle in half (the place where we knitted for the front and back
walls, there should be magic ring inside).
We tie the sides of the SC bag with a beige wool mixture, the magic ring to the magic ring is shown in the photo.
We turn out the bag.
İncishivaem button-butterfly.
We collect a chain of 60 CH with a beige wool mixture.
Got a bag belt.
Long threads should remain on both sides of the chain, for which you need to carefully
incattach the strap to the bag.
We do not cut the threads, we string each of them on the 1st wooden bead on the magic ring and fix them
knot magic rings.
Then we cut off 7 small pieces of beige wool mixture and evenly knit them to the bottom
bags on the front side (where there were not knitted half loops).
Our magical ring is ready!
Broom.
Bast inc is a kind of artificial straw.
We select the required number of “straws” of the same length.
We will get a broom with a height of 15 cm, respectively, the length of the magic ring of each “straw” should be
in about 30 cm.
The more you collect, the better. Should be a good bunch.
We bend it in half and wrap it with a thin inco-wire just above the middle. Pin on
incovolok foamiran butterfly, fasten the end of the incovolok well and tighten it.
The broom is ready!
Here we have such a wonderful Khariton!
Magic ring for each of you, it will inevitably bring good luck and prosperity, because things made by your own
magic rings are endowed with magic!
