Hello dear amigurumi lovers, we share many amigurumi recipes with you in detail. The recipe we will share today will be the Buttoned Rabbit recipe.
It is really nice to knit amigurumi animal recipes. Buttoned Rabbit is a model that you will enjoy knitting. Make sure your kids will have a good time when this pattern is finished. There may be different Buttoned Rabbit recipes, but I can say this is the sweetest.
Amigurumi cute Buttoned Rabbit also helps you instill a love of animals in your kids.
Don’t forget to check out our other free recipes.
Buttoned Rabbit Materials:
İncyadtwo colors
Colour1=dark tint(3cl decmagic ring)
Colour2=LightShade(1cldec)
(Also a little inc orange and bright green for carrots, and others
colors for eggs)
4buttons
2 safety eyes 10mm
1 plastic safety hinge 30mm (see picture in template)
Crochet Hook:3mm
Scissors, needle
Mr. Haas has a movable head and movable arms and legs.
Abbreviations:
MAGİC RİNG-amigurumi rings
ch-air loop
sc-column
sl-st-connecting column
inc-incmagic ring
dec-dec-magic ring
Leg (2 parts)
Start with color 2 (light shade) for the sole.
R1: Knit a chain from 17ch.
R2: 2sc to 2nd st from the magic ring hook, 14sc, 4scch to the last ch, go to the next
side of the chain from ch, then 14sc, 2sccho to the last loop (36)
P3:2inc,14sc,4inc,14sc,2inc(44)
P4:2inc,18sc,4inc,18sc,3inc(54)
R5:52sc, change inc row color 1 (dark shade).
less than sc so that the color change is in the middle of the heel.
P6-9:54sc(54)
P10:22sc,dec,2sc,dec,2sc,dec,22sc(51)
P11:21sc,dec,1sc,dec,1sc,dec,22sc(48)
P12: 23 sc, 1sl-st, then we introduce the hook into the third loop of the base with inca from the hook of the magic ring, and
then in the third loop of the base to the left of the hook magic ring and inco we knit sl-st, so
way inco knit another 14sl-st, connecting the two halves of knitting together and
forming the foot.
Further 7sc. Now turned to the middle of the heel.
Fill the leg with filler.
P13: 7sc, 1sc on the top of the seam, 7sc(15)
R14-18:15sc(15)
R19: (4sc, inc) x3 (18)
R20-24:18sc(18)
R25:(5sc,inc)x3(21)
R26-30:21sc(21)
P31: (6sc, inc) x3 (24)
P32-36:24sc(24)
R37: (7sc, inc) x3 (27)
R38-42:27sc(27)
P43:inc,26sc(28)
Fill the foot with filler.
To knit the next part of the leg in this place, you must be right above
the middle of the heel. Otherwise, a certain number of sc, i.e. loops
offsets to get to that location.
Р44:13sc,inc,14sc(29)
R45:14sc,inc,14sc(30)
R46:14sc,inc,15sc(31)
R47:15sc,inc,15sc(32)
R48:15sc,2inc,15sc(34)
Р49:16sc,inc,1sc,inc,15sc(36)
P50-56:36sc(36)
P57: (4sc, dec) x6 (30)
P58:30sc(30)
Fill the leg with filler.
P59: (3sc, dec)x6(24)
P60:24sc(24)
Р61:(2sc,dec)х6(18)
Fill in the next.
Р62:(1sc,dec)х6(12)
Sew up the hole.
Pymagic ring(2 pieces)
Start with color 2 (light shade)
R1: Knit a chain from 5ch.
P2: 2sc in the second loop from the magic ring hook, 2sc, 4scch to the last ch, go to
the other side of the chain from ch, 2sc, 2sccho to the last ch(12)
P3:inc,4sc,2inc,4sc,inc(16)
R4:inc,7sc,inc,7sc(18)
P5:18sc(18)
P6: inc, 9sc, inc, 7sc+2sc to change inc to color 1 (dark tone).(20)
P7-10:20sc(20)
Fill the hand with filler.
P11: 9sc, dec, 7sc, dec+1sc in order to inc to the other side (18)
R12:9sl-st,9sc(18)
R13:9sl-st,9sc(18)
R14-24:18sc(18)
P25:9sc,9sl-st(18)
R26:9sc,9sl-st(18)
P27-29: 18sc(18)+4sc to the middle of the last row to go to the bottom
arms.
Fill inc shoulder with filler.
P30:inc,8sc,inc,8sc(20)
P31:20sc(20)
P32:inc,9sc,inc,9sc(22)
R33:22sc(22)+2sc to emboss again in the center.
P34:inc,10sc,inc,10sc(24)
P35:24sc(24)
P36:inc,11sc,inc,11sc(26)
R37-42:26sc(26)
P43: (11sc, dec) x2 (24)
Fill the top with filler.
P44: (2sc, dec) x6 (18)
P45: (1sc, dec) x6 (12)
Fill the hand with filler.
P46: (dec)x3(9)
Sew up the hole.
Body
The body is fully knitted in color 1 (dark shade). You will also need a part
safety hinge.
P1:6svMAGİC RİNG(6)
R2:6inc(12)
R3:(1sc,inc)x6(18)
R4:(2sc,inc)x6(24)
R5:(3sc,inc)x6(30)
R6:(4sc,inc)x6(36)
R7:(5sc,inc)x6(42)
P8:(6sc,inc)x6(48)
R9: (7sc, inc) x6 (54)
P10:(8sc,inc)x6(60)
R11-18:60sc(60)
R19: (18sc, dec) x3 (57)
R20:57sc(57)
P21: (17sc, dec) x3 (54)
P22:54sc(54)
P23: (16sc, dec) x3 (51)
P24:51sc(51)
P25: (15sc, dec) x3 (48)
R26:48sc(48)
P27: (14sc, dec) x3 (45)
R28:45sc(45)
P29: (13sc, dec) x3 (42)
P30:42sc(42)
P31: (12sc, dec) x3 (39)
R32:39sc(39)
P33: (11sc, dec) x3 (36)
R34-35:36sc(36)
P36: (10sc, dec) x3 (33)
R37-38:33sc(33)
P39: (9sc, dec) x3 (30)
R40-45:30sc(30)
P46: (8sc, dec) x3 (27)
R47:27sc(27)
P48: (7sc, dec) x3 (24)
R49:24sc(24)
Fill with body filler.
P50: (2sc, dec) x6 (18)
P51: (1sc, dec)x6(12)
Fill with body filler.
Place a piece of the safety hinge with the pin into the hole. Sew up the hole.
so that the pin remains protruding.
Buttoned Rabbit Head
Start with color 2 (light shade) for the muzzle.
part of the safety hinge.
P1:6svMAGİC RİNG(6)
R2:6inc(12)
R3:(1sc,inc)x6(18)
R4:18sc(18)
P5: (5sc, inc) x3 (21)
R6:21sc(21)
R7:(6sc,inc)x3(24)
P8: (7sc, inc) x3 (27). Replacing the color of the last column of the ken with color 1 (dark
shade).
R9: (8sc, inc) x3 (30)
R10:(9sc,inc)x3(33)
P11:(10sc,inc)x3(36)
R12:(11sc,inc)x3(39)
R13:(12sc,inc)x3(42)
R14:(13sc,inc)x3(45)
R15:(14sc,inc)x3(48)
R16-24:48sc(48)
P25: 1ch, 1 base loop inc, 47 sc (48)
P26: (6sc, dec)x6(42)
P27: (5sc, dec)x6(36)
P28: (4sc, dec) x6 (30)
P29: (3sc, dec)x6(24)
Place safety eyes between rows 15-16c inc with a gap between them at 15sc.
Fill a little head with filler.
P30:24sc(24)
P31:(2sc,dec)x6(eighteen)
Fix the head on the body: insert the body pin through the holes in the 25th row.
Inside the head, put on the plastic washer pins and screw tightly
hinge.
Fill the head with filler to the end.
P32: (1sc, dec) x6 (12)
Sew up the hole.
Ears (2 parts)
The ears are fully knitted in color 1 (dark shade).
P1:6svMAGİC RİNG(6)
P2: (1sc, inc) x3 (9)
P3-5:9sc(9)
R6: (2sc, inc) x3 (12)
P7-9:12sc(12)
R10:(3sc,inc)x3(15)
R11-13:15sc(15)
R14:(4sc,inc)x3(18)
R15-16:18sc(18)
R17:(5sc,inc)x3(21)
R18:21sc(21)
R19: (6sc, inc) x3 (24)
P20:24sc(24)
R21:(7sc,inc)x3(27)
R22:(8sc,inc)x3(30)
R23:(9sc,inc)x3(33)
P24:(10sc,inc)x3(36)
R25-29:36sc(36)
P30: (10sc, dec) x3 (33)
R31:33sc(33)
P32: (9sc, dec) x3 (30)
P33: (8sc, dec) x3 (27)
P34: (7sc, dec) x3 (24)
P35: (6sc, dec) x3 (21)
Leave a long thread for inc sewing.
Embroider the inside of the ear with color 2 (light shade) of your choice.
İnc and inc stitching the ears to the head, turn the ears at the bottom with a boat.
Tail
The tail is fully knitted in color 2 (light shade).
P1:6svMAGİC RİNG(6)
R2:6inc(12)
R3:(1sc,inc)x6(18)
R4:(2sc,inc)x6(24)
P5-7:24sc(24)
P8: (2sc, dec) x6 (18)
Р9:18sc, inc knit only behind the back wall (18).
edge to be able to sew the tail to the body.
Collecting the magic ring
İnc sew the ears on both sides of the head so you like the magic ring.
Hands and buttons with buttons to the body.
Oinc divide where the legs should inc lie down to the body and fix this position inc
use the magic ring in the wire. Take a double thread of color 1 (dark shade) and
a piece of incowire.İncocolite incowire legs through the body through and through, fixing
leg position
Insert the needle from the inside of the leg, pull it out. Take the button and
inc thread the needle through it. Insert the needle in the same place, back through
leg through the body at the attachment point. Insert the needle at the attachment point
from the inside out through the other leg. Take the button and inc put it through
needle.
body. Remove the needle in place of the very first needle.
Now sit the beginning and end of the thread between the first leg of the body. Carefully
inc pull on both sides of the thread so that the legs are tight inc and legally the body and that’s it
still able to move. Tie the ends of the thread with a triple knot and
remove his body.
Repeat this procedure for the hands.
Embroider with black thread on the face of the hare.
Embroider the toes with black thread.
Fill in the tails inc and sew it to the body of the loop of the lace edge.
Tie a scarf in the desired color of your choice.
Carrotmagic ring
Carrot magic ring is fully knitted in orange.
knitting.
P1:6svMAGİC RİNG(6)
P2: (1sc, inc) x3 (9)
P3-6:9sc(9)
R7: (2sc, inc) x3 (12)
P8-10:12sc(12)
R11:(3sc,inc)x3(15)
R12-14:15sc(15)
R15:(4sc,inc)x3(18)
R16-18:18sc(18)
R19:(5sc,inc)x3(21)
R20-22:21sc(21)
R23:(6sc,inc)x3(24)
P24-25:24sc(24)
R26:(7sc,inc)x3(27)
R27-28:27sc(27)
R29: (8sc, inc) x3 (30)
P30:30sc(30)
R31: (9sc, inc) x3 (33)
R32:(10sc,inc)x3(36)
R33-37:36sc(36)
P38: (4sc, dec) x6 (30)
P39: (3sc, dec)x6(24)
P40: (2sc, dec) x6 (18)
P41: (1sc, dec) x6 (12)
P42:3dec(9)
Sew up the hole.
Carrot leaves inc are a chain of air loops tied
pillars with magic rings without a crochet and magic rings with air loops, about 10-12 cm long.
Tie a chain of air loops of the desired length, replace it in a circle. Start
tie the pillars with magic rings without a crochet, periodically making arches from air loops.
this you need to dial 6ch, inc omit two loops of the base and the third inco knit sc.
repeat periodically, varying between the magic ring and the number of inc intermediate columns
beznakida.
Tie around.
Fold the circle in half inc and the necks of the open top of the carrot.
the leaves were in the turn and the magic ring in the right position, wrap them several times around the base
green inc. Cut the thread and inc ponytails in the carrot.
Eggs
Eggs can be knitted from the rest of the yarn of various colors. Fill the eggs with filler according to
knitting.
P1:6svMAGİC RİNG(6)
R2:6inc(12)
R3:(1sc,inc)x6(18)
R4:(2sc,inc)x6(24)
R5:(3sc,inc)x6(30)
R6:(4sc,inc)x6(36)
P7-11:36sc(36)
P12:(10sc,dec)x3(33)
R13-14:33sc(33)
P15: (9sc, dec) x3 (30)
R16:30sc(30)
P17: (8sc, dec) x3 (27)
R18:27sc(27)
R19: (7sc, dec) x3 (24)
P20:24sc(24)
P21: (2sc, dec)x6(18)
P22: (1sc, dec) x6 (12)
P23:(1sc,dec)x3(9)
Sew up the hole.