This master class includes a full description of incosesl-st
knitting toys, inc intermediate photos of details. Additionally given
panama knitting description.
The magic ring toy is knitted from the bottom up, “half-crossing the magic rings”, in a spiral (if not the magic ring is different).
The nose, upper legs and tail are tied in, the ears are incised. Trousers
non-removable. Panama is removable.
With the use of magic ring materials, the height of the finished toy is about 19-20 cm.
Mark the beginning of the magic ring of each row with a contrasting thread thinner than the one
from which you knit a toy.
The description does not contain tutorials and is intended for those who already
has basic crochet skills.
This description is my author’s development and is absolutely FREE.
Toys with magic rings created according to this description,
magic ring, call me, magic ring to the author of the description.
Required materials and tools:
1. Hook matching your inc.
2. İncyazha YarnArt JEANS of any colors you choose. I have number 85 main and
No. 28 for the nose. For pants, colors No. 52, 60, 35 are used. For Panama
No. 16, 75, 35.
3. A little black or dark brown thread to decorate the muzzle. Take it thinner than the main one from which you will knit a toy. I used “Openwork” from “Pekhorka” No. 02 (black 280 m / 50 gr.) Do not take the entire thickness of YarnArt JEANS for embroidery, it will look great on the muzzle. You can share it.
4. Filler.
5. Eyes on a secure mount 10 mm, or incisive, or glue (beads,
half a decusine – your choice).
6. White felt circles with a diameter of 15 mm for proteins.
7. Strong magic ring thread for tightening.
8. Needle for incishing details, scissors, pins, marker thread.
9. Button for webbing.
Legend:
MAGİC RİNG – amigurumi ring
sc – single crochet
ch – air loop
inc – incibavmagic ring
dec – decаmagic ring
sl-st – connecting column
(…)*X – repeat X times the magic ring given in the magic rings brackets
The number after the magic ring = means the total number of loops in the row
upper paws
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3-17 rows: = 12 sc
We stuff a little only the lower part of the paws. Fold in half and knit 6 sc
for both walls. We fasten the thread and cut it off.
We will tie the paws.
Nose
We dial 5 ch, from the second from the crochet magic ring loops we knit:
1 row: inc, 2 sc, 4 sc in 1 loop, 2 sc, inc = 12
2nd row: 2 inc, 2 sc, 4 inc, 2 sc, 2 inc = 20
3-4 rows: 20 sc
5th row: Dec 10
Fasten the thread and cut.
You can fill the spout with a light magic ring now, you can later. His
we will tie.
Head
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4 row: (2 sc, inc) * 6 = 24
5 row: (3 sc, inc) * 6 = 30
6 row: (4 sc, inc) * 6 = 36
7 row: (5 sc, inc) * 6 = 42
8 row: (6 sc, inc) * 6 = 48
9 row: (7 sc, inc) * 6 = 54
10 row: (8 sc, inc) * 6 = 60
11-12 rows: 60 sc
13 row: (9 sc, inc) * 6 = 66
14-18 rows: 66 sc
In the next row, we will tie out the cheeks and tie in the nose.
Page 4 of 12
19 row: 19 sc, (1 sc, inc) * 6, 5 sc with 5
nose loops, (inc, 1 sc)*6, 18 sc = 78
20 row: 37 sc, 5 sc on the remaining
nose loops, 36 sc = 78
The spout is slightly stuffed magic ring, if not stuffed
earlier.
21-30 rows: 78 sc
If you use eyes on a safe mount, then install them
at this stage. Between 17 and 18 rows.
Between installation sites 6-8 sc. I have
7 sc. Center the eyes on
nose.
We take circles from felt. Carefully, so that there is no wrinkling, fold in half and make small cuts, shifting slightly from the center to the edge.
Turn the circles and do
perpendicular cuts (as a result, it turns out crosswise). Insert into them
eyes and fix in the canvas.
Later, after tightening, felt
can be fixed with glue.
31 row: (11 sc, dec) * 6 = 72
32 row: (7 sc, dec) * 8 = 64
33 row: (6 sc, dec) * 8 = 56
34 row: (5 sc, dec) * 8 = 48
35 row: (4 sc, dec) * 8 = 40
36 row: (3 sc, dec) * 8 = 32
37 row: (2 sc, dec) * 8 = 24
We fill the head tightly, but without excess
diligence
Keep in mind that there will be stretch marks. We fasten the thread behind and incide inside.
Tail
1 row: 6 sc in MAGİC RİNG
2 row: (1 sc, inc) * 3 = 9
Author: Olga Romakhina, https://vk.com/o.romakhina
Page 5 of 12
3-4 rows: 9 sc
5 row: 4 sc, inc, 4 sc = 10
6-11 rows: 10 sc
Ears
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4 row: (2 sc, inc) * 6 = 24
5 row: (3 sc, inc) * 6 = 30
6 row: (4 sc, inc) * 6 = 36
7-23 rows: 36 sc
24 row: (4 sc, dec) * 6 = 30
25 row: 30 sc
26 row: (3 sc, dec) * 6 = 24
27 row: 24 sc
28 row: (2 sc, dec) * 6 = 18
29-31 rows: 18 sc
Fold piece in half, inc tie together behind both walls 9 sc. A thread
fasten, cut, leaving a small segment for incising to
head.
Lower legs
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4-5 rows: 18 sc
6 row: 3 sc, 6 dec, 3 sc = 12
7 row: 12 sc
change color to green #52
8 row: 12 sc
knit the next row for the back half loops:
9 row: (1 sc, inc) * 6 = 18
10 row: 18 sc
11 row: (2 sc, inc) * 6 = 24
12 row: 24 sc
On the first leg, we temporarily fix the thread and cut it, leaving a segment of about 30
see. On the second we do not cut. Add up
the paws are nearby and we determine the degree of “oblique paw” of the future toy.
İnco knit on the second foot a few
additional columns to the junction, to the inside (I have this
7 sc, your degree of displacement may
different from mine).
We return to the first foot and knit the same number of additional columns. We do this so that the legs of the ki are the same in height. Now we can fasten the thread and cut it short. We decorate the marker threads.
On the first paw, we count back inc the number of additional columns you added, increased by 2 times.
In my case, it is 14. This is the place where the first foot meets the second. İncverify
symmetry, inciliving paws to each other
other places of connection.
Body
We stuff the body tightly, in incosesl-ste knitting.
We knit a chain of 3 v / n, connect the paws.
1 row: 24 sc on the first leg, 3 sc
in a chain of ch, 24 sc in the second
leg, 3 sc in a chain of ch.
The total number of loops in a row =
54
We put a marker thread.
2 row: (8 sc, inc) * 6 = 60
3 row: 60 sc
4 row: (9 sc, inc) * 6 = 66
5-7 rows: 66 sc
in the 8th and 9th rows we knit a tail.
8 row: 62 sc, then 5 sc with
tail, capturing 1 loop of the next row = 66
We put the marker in the 9th row after the 66th loop,
loop count does not change.
Please note that your offset
inc stitches and knitting may vary.
Position the ponytail in the back center.
9 row: = 62 sc, 5 sc for the remaining
tail loops, also, capturing 1
next row stitch = 66
For convenience, the marker thread can be
pull out and install again, before
the first loop of the 10th row (after the 4th loop along
tail). The tail can be slightly filled with magic ring and,
if desired, place an inco-wire inside. I incautiously filled the magic ring with filler.
10 row: 66 sc
In the 11th row we change the color to light green, No. 60. We will knit 2 sc magic ring
usually, 2 sc under the loops of the next
row. Repeat until the end of row 11.
11 rows: 66 sc
12 row: (9 sc, dec) * 6 = 60
13 row: 60 sc
14 row: (8 sc, dec) * 6 = 54
In the 15th row we change the color to yellow, No. 35.
We will also knit, 2 sc magic ring, usually 2
sc under the inc loops of the next row. Repeat until the end of the 15th row.
15 row: 54 sc
16 row: (7 sc, dec) * 6 = 48
17 row: 48 sc
18 row: (6 sc, dec) * 6 = 42
change color to orange, no. 85 and knit for the back half loops
19 row: 42 sc
20 row: (5 sc, dec) * 6 = 36
21-23 row: 36 sc
In the 24th row we will knit the upper paws.
Stuff the body of the calf fairly tight, but not all the way. Leave about
1 cm to inc and tying the paws to you
it was comfortable and the filler did not fall
between the columns. We incide the knitting points strictly according to magic rings: 6 each
sc along with magic rings, 12 sc between them.
Given my offset, I ended up with this:
24 row: 8 sc, 6 sc with the foot, 12 sc, 6 sc with the foot, 4 sc = 36
25 row: 36 sc
26 row: (4 sc, dec) * 6 = 30
27 row: (3 sc, dec) * 6 = 24
İncovyazyvaem a few more columns (at
I got 1 sc and sl-st in the next loop) and
we fasten the thread at the back in the center of the back.
Leave about 50 cm for incising
heads. Remove the marker thread. Dense but stuff the part to the end. İnci incishi vaniye of the head, do not forget to beat in
neck filler. For convenience, you can
fix the head with the body with knitting needles.
Magic ring
Let’s form a mouth and eye chadins with a tightening. Note the clubs with magic rings
6 points on the muzzle.
Let’s add the middle of the muzzle. It is convenient to do this by laying down a thread,
needle or needle down from the center of the nose. We put marks between the 29th and 30th rows. Between clubsmagic rings 2-3 sc.
Between the 18th and 19th rows we mark 4 more points from the outer and inner
corners of the eyes. From the inner corners, this is the beginning and end of the knitted wear magic ring. Between internal and external dotmagic rings 2 sc.
Insert the needle at point 1, leave
the end of the thread is about 25-30 cm, we bring it out at point 2. Further to point 3,
output at point 6.
Increasing the thread so that it fits under the magic ring under the eye and felt
circle, tighten, tie
for 2 knots. Without cutting the thread, enter
to point 6, output at point 5, then to point 4, output at point 1.
Tighten, tie a couple
nodes. inc thread inside the head.
Last nodule and entry sites and
threads can be neatly
lubricate with universal inc glue. I have Moment Crystal.
Bottom line
We leave a piece of thread about 30 cm, we collect it in MAGİC RİNG 6 sc, we tighten it.
We leave a segment of about 40-45 cm, cut the thread.
We got a detail, close to the magic ring in shape to
semicircle. We measure the part, fasten it to
rasl-st standing 2-3 rows down from the mouth tightening.
We fix the middle of where we fix a little below the edges. İnc and incisivanie, thread tension should be moderate. We don’t pull hard. We bring the middle thread to the back of the head (in MAGİC RİNG) and back
through any adjacent column. I threw a small stitch from
the center of the ring through the row inside the head. You can repeat it again.
We make the stitch tightly, but do not tighten. Incline thread inside the head
several confusing stitch magic rings.
With the second segment of the thread we fix both edges of the place. We make stitches up
and back. We bring it to the place where the nose is knitted (between the 18th and 19th rows).
Thanks to the magic rings, they will be invisible there.
We make panties
At this stage, we will tie the pillars with magic rings without a crochet on the bottom of the legs with green and
top with yellow flowers.
We tie the legs along the half-loops of the 9th row remaining outside, holding the toy knife magic rings towards us.
We tie the top of the panties along the half-loops of the 19th row remaining outside, holding the toy knife magic rings away from you.
We do not break the thread, we immediately tie the strap with a chain of air loops. With my knitting density, it turned out 23 loops. Let’s fix it
obliquely sl-st for the strapping, leave about 50-55 cm and cut. We pull the same thread through the button, bring the thread back to the beginning of knitting
straps. We make a couple of knots and inc the ends inside the toy.
Author: Olga Romakhina, https://vk.com/o.romakhina
İncishivaem ears
We incise the ears after the 12th row from
crowns. Distance between ears magic rings 26 loops. That is, 13 loops to the sides from the center of the muzzle.
So that the ears do not bulge,
lightly moisten them with water (spontaneously or from a spray bottle), incco pour the magic rings with pins and leave until
complete drying in about 12 hours.
If desired, with a thin black thread, you can embroider eyebrows, “folds” over the magic rings and a strip from
nose to mouth.
Panama (flat bottom)
Panama is knitted magic ring for Monya İncyanikov, only without holes for the ears.
We knit with “checkmark magic rings”, NON-TIGHT, from top to bottom.
Consider your density. You may need more
hook numbermagic ring. İncimeryayte in incosesl-ste knitting, adjust the desired
gldecin at your own discretion. I have changed colors, you can knit a one color panama hat, in section dyed or melange incyan.
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (inc, 1 sc) * 6 = 18
4 row: (2 sc, inc) * 6 = 24
5 row: (inc, 3 sc) * 6 = 30
6 row: (2 sc, inc, 2 sc) * 6 = 36
7 row: (4 sc, inc, 1 sc) * 6 = 42
8 row: (6 sc, inc) * 6 = 48
9 row: (inc, 7 sc) * 6 = 54
10 row: (2 sc, inc, 6 sc) * 6 = 60
11 row: (4 sc, inc, 5 sc) * 6 = 66
12 row: (6 sc, inc, 4 sc) * 6 = 72
13 row: 72 sc for the back half loops (or concave pillars of magic rings
single crochet)
14-21 row: 72 sc
22 row: (8 sc, inc, 3 sc) * 6 = 78
23 row: (10 sc, inc, 2 sc) * 6 = 84
24-28 rows: 84 sc
İncimerite panama, if you like the thread, then the thread can be fastened and cut.
If necessary, the number of rows can be increased or decreased to sew.
That’s it, our dog won’t bake his head!