Materials used:
Beige Coco fabric
3889
Green Coco fabric
3861
Coco leather black
(several meters for embroidery
eyebrows and smile)
Hook 0.95
Foamiran or felt (black
and white (for eyes, health,
horn). Can be used
polymer clay of the same
colors.
Hair for dolls and toys
(curly) black or
brown
Button
İncolomagic ring for magic ringрmagic ringа
Acrylic ring in black or brown for cummagic ring
magic ring tails (literally a few meters will be needed)
Brushmagic ring-powdermagic ring for
animals (needed for
combing acrylic
inciazhi)
Needle for stitching parts
Glue Crystal and B7000
Filler for toys
Brown pastel for
tinting
Tinting brush
Band-Aid
Legend:
MAGİC RING – Amigurumi Ring
inc – İncibavmagic ring
dec – Decаmagic ring
sc – Single crochet
without change – We knit the row without changes (we do not make cuts and
incibok)
PSN – half double crochet
Head
The marker goes along the back of the head
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)*6 times
Row 4: (2 sc, inc)*6 times
Row 5: (3 sc, inc)*6 times
Row 6: (4 sc, inc)*6 times
Row 7: (5 sc, inc)*6 times
Row 8: (6 sc, inc)*6 times
Row 9: (7 sc, inc)*6 times
Row 10: no change
11th row: no change
Row 12: no change
Row 13: no change
Row 14: no change
Row 15: no change
Row 16: (8 sc, inc)*6 times
Row 17: no change
Row 18: (9 sc, inc)*6 times
Row 19: no change
Row 20: no change
Row 21: (10 sc, inc)*6 times
Row 22: no change
Row 23: no change
Row 24: (11 sc, inc)*6 times
Row 25: no change
Row 26: no change
Row 27: 20 sc, (1sc, inc)*6 times, 7 sc, additional color
Use a thread to mark the center of the face, 7 sc, (inc, 1 sc)*6 times, 20 sc.
Row 28: no change
Row 29: no change
Row 30: no change
Row 31: no change
Row 32: no change
Row 33: no change
Row 34: no change
Row 35: no change + 2 shift stitches (you may need to
more or less bias loops. It all depends on your mating)
Row 36: 20 sc, (1 sc, dec)* 6 times, 14 sc, (1 sc, dec)*6 times, 20 sc.
Row 37: no change
Row 38: no change
Row 39: (11 sc, dec)* 6 times
Row 40: 5 sc, dec, 10 sc, dec, 10 sc, dec, 10 PSN, dec, 10 sc, dec, 10
sc, dec, 5 sc.
41 row: 9 sc, dec, 9 sc, dec, 5 sc, dec, 10 PSN, dec, 9 sc, dec, 9 sc, dec,
3sc.
Row 42: 5 sc, dec, 5 sc, dec, 5 sc, dec, 5 sc, dec, (1 sc, inc)* 4 times,
dec, 5 sc, dec, 5 sc, dec, 6 sc, dec.
Row 43: (4 sc, dec)* 9 times,
2sc.
Row 44: (2 sc, dec)*11 times, 3
sc.
Row 45: (2sc, dec)* 9 times
Row 46: (1 sc, dec)* 9 times
Row 47: 9 dec
We stuff it tightly. Special
We pay attention to the magic rings and
chin.
Fasten the thread and leave
end for incision.
Ears.
We knit two parts.
Elmmagic ring is very dense so that the ears keep their shape and do not fall.
You can use a slightly smaller hook. We don’t fill in the details.
We make the decaps especially tightly. Our ear should have a shape
double spoon.
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (6 sc, inc)* 4 times
4th row: no change
5 row: no change
6th row: no change
Row 7: (2 sc, dec)* 4 times
Row 8: no change
Row 9: no change
Row 10: no change
11th row: no change
Row 12: no change
Row 13: (2 sc, inc)* 4 times
Row 14: no change
Row 15: (3 sc, inc)* 4 times
Row 16: no change
Row 17: (4 sc, inc)* 4 times
Row 18: (5 sc, inc)* 4 times
Row 19: no change
Row 20: no change
Row 21: (5 sc, dec)* 4 times
Row 22: (4 sc, dec)* 4 times
Row 23: (3 sc, dec)* 4 times
Row 24: (2 sc, dec)* 4 times
Tail
Type 8 sc in MAGİC RING.
We knit a tail 14 cm long.
We cut off the incovolok 28-30 cm. If there is a magic ring braid, do not remove it.
Wrap one end with a piece of adhesive tape and insert
incovolok in the tail. We remove the braid from the place where ours ends
tail so that we can insert it into the knitted body.
Nose.
We cast on 7 air loops, in the second loop from the magic ring hook
knit: inc, 4 sc, 2 inc in the last loop, 4 sc in reverse
side, inc.
Row 2: 2 inc, 4 sc, 4 inc, 4 sc, 2 inc.
Row 3: 3 inc, 6 sc, 6 inc, 6 sc, 3 inc.
4th row: no change
5 row: no change
6th row: no change
7th row: no change
8 row: 2 dec, 14 sc, 2 dec, 14 sc.
Fasten the thread and leave the end for incision.
Hands.
Incavaya magic ring.
Thumb
1st row: 6 in MAGİC RING
2nd row: 6 incib
3rd row: no change
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Fasten the thread and cut it.
Next, the fingers are knitted according to the description. Need to link 3
identical fingers. We knit two, fasten the thread and cut it off,
We don’t cut off the thread on the third finger, we will continue to knit from it
hand.
Fingers (3 pcs)
1st row: 6 in MAGİC RING
2nd row: 6 incib
3rd row: no change
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Row 8: no change
Row 9: no change
Row 10: no change
After the magic ring all 4 fingers are tied without cutting the thread
inc we continue to knit the hand. As you knit, we stuff the part and
insert the incovolok
I’ll connect the finger and knit 6 sc along it. Let’s connect again
one finger and knit 12 sc on it. Next again along the middle finger
6 sc, on the next finger 6 sc and place a marker.
1st row: 5 sc, dec, 4 sc, dec, 10 sc, dec, 4 sc, dec, 5 sc.
2nd row: no change
3rd row: no change
4th row: no change
5th row: 12 sc, inc join the thumb and knit inc
together 4 sc, 16 sc by hand.
Row 6: 12 sc, on the outside of the finger 8 sc, 16 sc.
7th row: no change
8 row: dec, 14 sc, 2 dec, 14 sc, dec
Row 9: no change
Row 10: (6 sc, dec)* 4 times
Row 11: (5 sc, dec)* 4 times
Row 12: (4 sc, dec)* 4 times
Row 13: no change
Row 14: no change
Row 15: no change
Row 16: no change
Row 17: no change
Row 18: no change
Row 19: no change
Row 20: no change
Row 21: no change
Row 22: no change
Row 23: no change
Row 24: no change
Row 25: no change
Row 26: (3 sc, dec)* 4 times
Row 27: (3 sc, inc)* 4 times
Row 28: no change
Row 29: no change
Row 30: no change
Row 31: no change
Row 32: no change
Row 33: no change
Row 34: no change
Fasten the thread and cut it.
Left hand magic ring.
We knit the fingers in the same way. First thumb, then 3 fingers
hands, after the third we do not break the thread but continue to knit. By
As you knit, stuff the part and insert the incline
Thumb.
1st row: 6 in MAGİC RING
2nd row: 6 incib
3rd row: no change
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Fingers (3 pcs)
1st row: 6 in MAGİC RING
2nd row: 6 incib
3rd row: no change
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Row 8: no change
Row 9: no change
Row 10: no change
Let’s continue knitting the hand
We connect the finger and knit 6 sc along it. Let’s connect again
one and knit 12 sc. Next 6 sc on the middle finger, and another 6 sc on
to the next one. We put a marker.
1st row: 5 sc, dec, 4 sc, dec, 10 sc, dec, 4 sc, dec, 5 sc.
2nd row: no change
3rd row: no change
4th row: no change
Row 5: Inc we connect the thumb and inc we knit 4 sc together,
28 sc on the arm.
Row 6: 8 sc on the outside of the finger, 28 sc on the hand.
7th row: no change
8 row: 2 dec, 14 sc, 2 dec, 14 sc,
Row 9: no change
Row 10: (6 sc, dec)* 4 times
Row 11: (5 sc, dec)* 4 times
Row 12: (4 sc, dec)* 4 times
Row 13: no change
Row 14: no change
Row 15: no change
Row 16: no change
Row 17: no change
Row 18: no change
Row 19: no change
Row 20: no change
Row 21: no change
Row 22: no change
Row 23: no change
Row 24: no change
Row 25: no change
Row 26: (3 sc, dec)* 4 times
Row 27: (3 sc, inc)* 4 times
Row 28: no change
Row 29: no change
Row 30: no change
Row 31: no change
Row 32: no change
Row 33: no change
Row 34: no change
Fasten the thread and cut it. Let’s stuff it. We insert the incovolok,
approximately 15 cm in the magic ring, waiting for my hand.
Legs.
The other leg.
First we knit the fingers, and only then we knit them together.
Little finger:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
Fasten the thread and cut it
Average:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Fasten the thread and cut it
Big:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Row 8: no change
Row 9: no change
We do not cut the thread. We continue to knit on the thumb 6 sc.
We connect the middle finger and knit 9 sc along it.
We connect the little finger and knit 18 sc. Next along the middle finger 9
sc. Move to the thumb and knit 12 sc. We put a marker.
1st row: no change
2nd row: 5 sc, dec, 8 sc, dec, 15 sc, dec, 8 sc, dec, 10 sc.
3rd row: no change
4th row: 20 sc, 2 dec, 20 sc, 2 dec, 2 sc.
5 row: no change
Row 6: 20 sc, dec, 20 sc, dec, 2 sc.
7th row: no change
8 row: 20 sc, 2 dec, 16 sc, 2 dec.
Row 9: no change
Row 10: dec, 16 sc, dec, 20 sc
11th row: no change
Row 12: dec, 15 sc, dec, 19 sc
Row 13: no change
Row 14: dec, 14 sc, dec, 18 sc
Row 15: no change
Row 16: dec, 15 sc, dec, 15 sc
Row 17: no change
Row 18: dec, 14 sc, dec, 14 sc
Row 19: no change
Row 20: dec, 13 sc, dec, 13 sc
Row 21: no change
Row 22: dec, 12 sc, dec, 12 sc
Row 23: (1 sc, dec)* 8 times, dec.
24 row: 8 dec, 1 sc
We stuff it tightly, thereby making the leg flat. Hole
close. Fasten the thread and cut it.
Almost on the 7th row we cast on 24 sc in beige.
1st row: 24 sc
2nd row: 24 sc
3rd row: 24 sc
4th row: 24 sc
Row 5: 24 sc.
Row 6: Change the thread to
green and knit 24 sc
behind the back half loop
Row 7: (5 sc, inc)* 4 times
Row 8: (6 sc, inc)* 4 times
Row 9: (7 sc, inc)* 3 times, 3 sc
We don’t tie it to the marker. Fasten the thread and cut it.
The other leg.
Little finger:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
Fasten the thread and cut it
Average:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Fasten the thread and cut it
Big:
1st row: 6 in MAGİC RING
2nd row: 6 inc
Row 3: (1 sc, inc)* 6 times
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Row 8: no change
Row 9: no change
We do not cut the thread. We continue to knit on the thumb 6 sc.
We connect the middle finger and knit 9 sc along it.
We connect the little finger and knit 18 sc. Next along the middle finger 9
sc. Move to the thumb and knit 12 sc. We put a marker.
1st row: no change
2nd row: 5 sc, dec, 8 sc, dec, 15 sc, dec, 8 sc, dec, 10 sc.
3rd row: no change
4th row: 20 sc, 2 dec, 20 sc, 2 dec, 2 sc.
5 row: no change
Row 6: 20 sc, dec, 20 sc, dec, 2 sc.
7th row: no change
8 row: 20 sc, 2 dec, 16 sc, 2 dec.
Row 9: no change
Row 10: dec, 16 sc, dec, 20 sc
11th row: no change
Row 12: dec, 15 sc, dec, 19 sc.
Row 13: no change
Row 14: dec, 14 sc, de c,18 sc.
Row 15: no change
Row 16: dec, 15 sc, dec, 15 sc
Row 17: no change
Row 18: dec, 14 sc, dec, 14 sc
Row 19: no change
Row 20: dec, 13 sc, dec, 13 sc
Row 21: no change
Row 22: dec, 12 sc, dec, 12 sc
Row 23: (1 sc, dec)* 8 times, dec.
24 row: 8 dec, 1 sc
We stuff it tightly, thereby making the leg flat. Hole
close. Fasten the thread and cut it.
Almost on the 7th row we cast on 24 sc in beige. BEFORE
THEN MAGİC RINGK DIAL, LOOK THAT THE LEGS
WERE LOCATED INCAVILIALLY. THUMBS
MUST LOOK INSIDE.
1st row: 24 sc
2nd row: 24 sc
3rd row: 24 sc
4th row: 24 sc
Row 5: 24 sc.
Row 6: Change the thread to green and knit 24 sc behind the back
half loop
Row 7: (5 sc, inc)* 4 times
Row 8: (6 sc, inc)* 4 times
Row 9: (7 sc, inc) * 4 times
We knit another 4 sc. We do not tear off the thread. Dial 10
chain stitches and inc we continue to knit on the left leg 35 sc, 10
along the chain, 35 sc on the other leg, 10 sc on the chain on the other
sides. We put a marker.
Body.
Row 1: (8 sc, inc)* 10 times
2nd row: no change
3rd row: no change
4th row: no change
5 row: no change
6th row: no change
7th row: no change
Row 8: no change
Row 9: no change
Row 10: no change
Row 11: (8 sc, dec)* 10 times
Row 12: no change
Row 13: no change
Row 14: (7 sc, dec)* 10 times
Row 15: no change
Row 16: (6 sc, dec)* 10 times
Row 17: no change
Row 18: no change
Row 19: no change
Row 20: (5 sc, dec)* 10 times
Row 21: no change
Row 22: no change
Row 23: no change
Row 24: no change
Row 25: no change
Row 26: no change
Row 27: (4 sc, dec)* 10 times
Row 28: no change
Row 29: no change
Align the marker. It should be exactly in the center of the back.
Insert the tail approximately on the 12th row. We fill the body very much
tight.
Change the thread to beige.
Row 30: knit in the back half loop without changes.
Row 31: no change
Row 32: no change
Row 33: no change
Row 34: no change
Row 35: no change
Row 36: no change
Row 37: no change
Row 38: 10 sc,
inciconnect
left hand and
knit together 7 sc,
16 sc on the front
body parts, 7 sc
together with incava
by hand, 10 sc.
Row 39: 10 sc, 13
sc on the outside
side of the arm, 16 sc, 13 sc on the outside of the arm, 10 sc.
We connect the magic ring and magic ring and wrap it with adhesive tape.
Row 40: 9 sc, dec, 4 sc, dec, 4 sc, dec, 14 sc, dec, 4 sc, dec, 4 sc, dec,
9sc.
41 row: 9 sc, dec, 3 sc, dec, 3 sc, dec, 13 sc, dec, 3 sc, dec, 3 sc, dec, 8
sc.
Row 42: no change
Row 43: (6 sc, dec)* 6 times
Row 44: (5 sc, dec)* 6 times
Row 45: (4 sc, dec)* 6 times
Row 46: (3 sc, dec)* 6 times
Row 47: (2 sc, dec)* 6 times
Row 48: no change
Row 49: no change
Row 50: no change
Row 51: no change
We knit a lapel on the pants. We start from the back so that we have the lapel
turned out with facial loops. We knit not tightly, for the remaining
half loop. No changes, 5 rows.
Magic ring for pants
We knit in green. Rotary rows. At the end
magic ring For each row we make a lifting loop.
1st row: 2 air loops
2nd row: incibavmagic ring
3rd row: 2 inc
4th row: 4sc
5 row: inc, 2 sc, inc
6th row: no change
Row 7: inc, 4 sc, inc
Row 8: no change
Row 9: no change
Row 10: 3 sc, dec, 3 sc.
11th row: no change
Row 12: no change
Row 13: 2 sc, dec, 3 sc.
14-33 row: no change.
Please measure your strap depending on the magic ring hook and density
knitting, you may need a little more or less
rows. If desired, you can tie the strap with magic rings without
Yarn over. We sew on the strap and button.
We do tightening.
We use magic rings and mark the points:
Points 9 and 10 – 15 row. There are 7 sc between them.
Points 3 and 4 – 24th row. There are 9 sc between them.
Points 1 and 6 – 24th row. Located 10 sc further and to the left
points 1 and 6.
Points 2 and 5 – 24th row. Located between magic rings 9 and 3, 10 and 4.
Points 7 and 8. Located between points magic rings 9 and 3, 10 and 4.
Points 11 and 12 – 39th row. There are 11 sc between them.
Points 13 and 14 – 41 rows. There are 11 sc between them.
A – hole in the lower part of the head.
We make sure that all points are located symmetrically to the points
marked in row 27 (center of the face).
Cut a long beige thread. We do the tightening in two
threads
We insert the needle into the hole from below (magic ring A). We leave the end
about 10 cm long so that it is convenient to tie knots.
We make the tightening according to the scheme (grabbing one sc at a time):
A –> 3 -> A – Pull and tie a knot
A –> 2 -> A – Pull and tie a knot
A –> 1 -> A – Pull and tie a knot
A –> 4 -> A – Pull and tie a knot
A –> 5 -> A – Pull and tie a knot
A –> 6 -> A – Pull and tie a knot
Bridge of the nose:
We make the drawstrings in a zigzag, grabbing the loop lower or higher
near. According to the scheme:
A –> 3 -> 4 –> 7 -> 8–> 9-> 10 –> A Pull and tie the thread
node We cut off and insert the ends inside the head.
Chin:
A –> 11 -> Capture sc below nearby –> 12-> Capture
sc below nearby –> A. Pull up. We tie a knot.
A –> 13 -> Capture sc below nearby –> 14-> Capture
sc below nearby –> A. Pull up. We tie a knot.
We cut off the thread and tie all the ends in the head.
Additionally, we stuff the cheeks (front and sides) and
chin to make them more pronounced.
If desired, you can repeat the decaps or tighten the magic ring
one.
We sew up the nose and stuff it. We sew up the ears. The place where
The ears are close to the head, I smeared them with glue and glued them in place.
We sew the head to body.
Head design.
The hair that I used looks like this (see photo
below). We take out a thin inc, cut it 8-9 cm long (in
stretched form). Fold it in half, insert the hook under
sc, grab the loop from inc, pull it inc through sc, and in
tighten the resulting loop into a curl. We tighten it tightly.
Curls are attached through
1 sc. Through magic ring every 2
row.
In front
heads approximately 3-4
row of curls are attached along
circle in the magic ring every sc.
Draw a template for the eyes on paper. I specifically
I took a picture of the eyes on a checkered sheet so you can get a closer look
could transfer the dimensions to your sheet based on
magic ring cell.
According to a ready-made template
cut out eyes from felt
or foamiran. Glue it together
them with glue. Glare is possible
made from the same material
or paint with acrylic
paint.
In the same way we make a small zdecik and horns.
For those who know how to work with polymer clay, the order
the work is absolutely the same.
Make a magic ring with clay 2-3 mm thick. Cut according to the template
(with a paper knife or craft knife) the white and pupil of the eye.
To smooth corners and remove fingerprints
We use Magic Ring wet wipes. We are already ironing them
cut out details. Apply the pupil and smooth it
with a damp cloth.
Let’s make highlights. Magic ring melt 2 small magic ring balls from white
polymer clay, flatten them a little, put them in
desired place, press and smooth with damp
napkin.
For the horns, cut 2 identical pieces of magic ring white polymer
clay. From the magic ring we make magic ring pellets and flatten them a little.
We measure the size, and if we are satisfied with everything, the lower part is at the back
cut at an angle. This will be the place we incicle
horns to the head.
ATTENTION! When baking magic ring polymer clay, you need to strictly
Magic ring instructions are on the packaging!
We embroider a smile and eyebrows. You can glue them together with B7000 glue
to create the bend we need.
We glue the eyes and glue them with B7000 glue.
We glue the horns only with the lower part, coating them with glue
only the bottom 1/3.
Making the tip of the tail.
For this we
will be needed
a few meters
acrylic inc.
Cut 4 threads
17 cm long.
Let’s add it all up
in half and tie a knot in the middle.
We hold this knot and comb it out
with a slicker brush. We make 3-4 more of these
sit down The quantity will depend on
how badly your hair has been combed.
We glue the knots together with instant glue. We cut our hair,
to define the shape of the brush. Glue the brush to the tip
tail glue crystal.
We tone between the fingers and toes, the inside of the elbows,
nose, cheeks, chin and inside of ears.
