In addition to these changes in this pattern, we are working with a copper wire
frame so the giraffe can stand and can move in all sorts of poses. if you have
questions or need help please feel free to send me a message.
Materials and tools
You can knit a giraffe from any fabric. The size depends on the size and used
hookmagic ring.
Materials I used for this giraffe:
– Hook 2 mm
– incyazha Alize cotton gold
– filler
– safety eyes with a diameter of 10mm
– Solid copper inc lead (if you are using the same incage, you will need 3
pieces of 75 cm)
– insulating tape
Head
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6. (4sc, 1 inc) 6x (36)
7. (5sc, 1inc) 6x (42)
8. (6sc, 1inc) 6x (48)
9.-14 48sc (6 rows)
15. (6sc, 1dec) 6x (42)
16. (5sc, 1dec) 6x (36)
17. (4sc, 1dec) 6x (30)
18. (3sc, 1dec) 6x (24)
19. (2sc, 1dec) 6x (18)
Take the inco-wire, bend the loop, fix the junction with electrical tape (see figure
below). İncosunite in the head and stuff it. Next, we knit the last two rows.
20. (1sc, 1dec) 6x (12)
21. (dec) 6x (6)
Horns (2x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (3sc, 1inc) 3x (15)
4.15sc (15)
5.15sc (15)
6. (3sc, 1dec) 3x (12)
7. ( dec) 6x (6) change color
8. 8-13. 6sc (6 rows)
Finish. leave the end for incising to the head.
Ears (2x)
Row:
1. 6 sc in MAGİC RİNG
2.6sc(6)
3. (1sc, 1 inc) 3x (9)
4. (2sc, 1 inc) 3x (12)
5. (3sc, 1 inc) 3x (15)
6. (4sc, 1 inc) 3x (18)
7.18sc
8.18sc
9.18sc
10.18sc
11. (4sc, 1dec) 3x (15)
12. (3sc, 1dec) 3x (12)
13.12sc
Finish, leave the end to incise. Fold ears and inc sew, magic ring to magic ring but
on the image.
Muzzlemagic ring
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6. (4sc, 1 inc) 6x (36)
7.36sc
8.36sc
9.36sc
10. (4sc, 1dec) 6x (30)
11.30sc
12.30sc
13. (3sc, 1dec) 6x (24)
14.24sc
15.24sc
16. (2sc, 1dec) 6x (18)
17.18sc
Finish, leave the end to incise. İncish muzzle on the head (see photo below)
Nostrils (2x)
In MAGİC RİNG 1sc, 1pssn, 2ssn, 1pssn, 1sc.
Eyes(2x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3.12sc
4.12sc
5.(dec)6x(6)
Insert safety eyes after 4 rows, fill a little.
Eyelids (2x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
Fold in half and inc over both sides of 9 sc. İncishit over the eyes.
Neck (4x)
You can knit the balls for the neck around the inco-wire that comes from the head, or
knit separately and then dress them. Leave a tail of thread to incise later
balls with each other.
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6. (4sc, 1 inc) 6x (36)
7. – 9 36sc (3 rows)
10. (4sc, 1dec) 6x (30)
11. (3sc, 1dec) 6x (24)
12. (2sc, 1dec) 6x (18)
13. (1sc, 1dec) 6x (12)
14.(1dec)6x(6)
translation by Valentin Ziegler
Body (6x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6. (4sc, 1 inc) 6x (36)
7. (5sc, 1inc) 6x (42)
8. (6sc, 1inc) 6x (48)
9. (7sc, 1inc) 6x (54)
10. (8sc, 1inc) 6x (60)
11. – 13 (3 rows) 60 sc
Finish. Then the parts will be connected to each other in a contrasting color.
Leg Bottom (4x) Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6. (4sc, 1 inc) 6x (36)
7. (5sc, 1inc) 6x (42)
8. (6sc, 1inc) 6x (48)
9. (7sc, 1inc) 6x (54)
topmagic ring feet (4x)
We also knit magic ring to the foot up to 9
row. Row 10-13 (4 rows) 54sc
Finish.
Legs(12x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5. (3sc, 1inc) 6x (30)
6.30sc
7.30sc
translation by Valentin Ziegler
8. (3sc, 1dec) 6x (24)
9. (2sc, 1dec) 6x (18)
10. (1sc, 1dec) 6x (12)
11.(dec)6x(6)
Put the balls on the inco-wire, then we will connect it to the body.
It’s a little more difficult. Lead 1 is already connected to the head and neck,
inc of leads 2 and 3 will be inc connected in inc, so it will be inc
magic ring magic rings. A mock-up of the magic ring looks like it’s inside a giraffe.
We take the top and bottom of the leg and begin to tie them together with magic rings single crochet. When
you have inc knitted approximately half, then take the inc 2 , inc pull it through
the top of the foot and bend it into the magic ring in the magic ring picture below. Don’t forget to fix
tape around the ends and fittings.
Stuff your feet.
On the upper part of the leg we take three magic ring balls. We sew all the balls with each other and with
bottom part with several stitch magic rings.
Now we will inc connect the parts of the body.
Take two pieces and in knit 10 sc together. Insert the inco-wire between both
pieces, then bend it and bring the end through the MAGİC RİNG of the second piece. Now
inc knit 20 sc.
Take incowl 2 (legs), make a small loop around incowl 1 (squeeze
loop with the help of flats to make it more accurate)
İnco knit another 20 sc together. Lead 2 will exit the body. Stuff and
inc knit the last 10 sc.
With a thread from the third ball of the magic ring we sew the leg to the body. We attach the second leg
similarly.
Take the next 2 parts of the body and knit them together sc. İncishivaem to the first
parts.
İncovolomagic ring 3 we connect the rear legs. Take the last 2 parts of the body and connect
them together incotying 20 sc. Loop around 1 inc wire. end of first
we isolate the incovoloks, we no longer need it. İncoconnect 20 sc, incconnect
the second leg and again inc 20 sc for both parts.
For the tail of the giraffe, I used different lengths of thread and different sizes of balls.
Of course, you can make the magic ring as you like.
Knit chains of VP of different lengths.
Tail balls(4x)
Row:
1. 6 sc in MAGİC RİNG
2. (inc) 6x (12)
3. (1sc, 1 inc) 6x (18)
4. (2sc, 1 inc) 6x (24)
5.24sc
6.24sc
7. (2sc, 1dec) 6x (18)
8. (1sc, 1dec) 6x (12)
9.(dec)6x(6)
İncish tail, decorate with a bow, ribbon or flower
