ROE
Milana chrysalis
Materials:
İncyaja Iris “batta” 87m/10g col. cream 0309 (for the body) – 1 skein; You can use the insyazh “Iris” PNK named after S.M. Kirov flesh-colored.
İncyaja Iris “batta” 87m/10g col. brown 0928 (for hair) – 1 skein;
İncyazha “Iris” PNK named after S.M. Kirov 150m/25g col. pink 1002 and col. mint 4102 – 1 skein;
Recommended hook size 1-1.05mm;
Filler (sintepuh or holofiber);
İncovoloka 0.5-1 mm (for the frame);
Band-Aid;
Fine embroidery needle;
Threads for embroidery “batta” (black, white, gold color for eyes, red color for gdec);
For a hat: incyazha “Pekhorka” Openwork col. gray, knitting needles No. 2;
For coats: incyaja dige Bayu moo1 col. pink, knitting needles No. 2.
With the use of these materials, the growth of the pupa will be 10-11 cm.
Legend:
CH – air loop;
SL-ST – connecting post;
SC – single crochet;
İNC – incibavka;
DEC – decave.
Note: it is desirable to make the decave invisible.
Please pay attention
Master-class-st incdelivered only for personal non-commercial use Any copying and distribution of the material is prohibited İnc Please indicate the author if the finished work is clicked.
Thanks for understanding
Arms
We start knitting incyazhey Iris “Satta” tsv. cream.
1 row. 6 SC in an amigurumi ring
2 row. İNC, 2SC, İNC, 2SC (8)
3-4 rows. 8SC
5 row. DEC, 6SC (7)
6-7 rows. 7SC
We change the thread to “Iris” PNK named after S.M. Kirov tsv. pink.
8-22 rows. 7 SC – 15 rows
The thread is cut and fastened.
We knit the second hand in the same way as the first.
Legs
We start knitting incyazhey Iris “Satta” tsv. cream.
Left leg:
1 row. 6 SC in an amigurumi ring
2 row. İNC, 2SC, İNC, 2SC (8)
3 row. 8SC
4 row. İNC, 7SC (9)
5 row. 9SC. İn knit another 1 SC (offset loop) and move the marker 1 loop in turn.
6 row. DEC, 7SC (8)
7 row. 3 SL-ST, 5 SC (8)
8 row. 3 SL-ST, 5 SC (8)
Connecting posts (SL-ST) should be on the front side of the leg. Knit them not tight, otherwise it will be difficult to put a hook in them later.
9-10 rows. 8 SC – 2 rows
11 row. 8SC
We change the thread to “Iris” PNK named after S.M. Kirov tsv. mint.
12-23 rows. 8 SC – 12 rows
The thread is cut and fastened.
Large leg:
1 row. 6 SC in an amigurumi ring
2 row. İNC, 2SC, İNC, 2SC (8)
3 row. 8SC
4 row. İNC, 7SC (9)
5 row. 9SC
6 row. 7SC, DEC (8)
7 row. 5 SC, 3 SL-ST (8)
8 row. 5 SC, 3 SL-ST (8)
9-10 rows. 8 SC – 2 rows
11 row. 8SC
We change the thread to “Iris” PNK named after S.M. Kirov tsv. mint.
12-23 rows. 8 SC – 12 rows Do not cut the thread!
Body
We start knitting with the inca leg (where we did not cut the thread), the working loop should be in the middle of the inside of the leg (we knit to this place).
We dial 4 CH and inc we connect the second leg to the first leg in the middle, inc knitting 1 SC (this will be the beginning of the row, so we put a marker here). We knit another 7 SC along the first leg, then we knit 4 SC along the dialed chain, 8 SC along the second leg and another 4 SC along the dialed chain. As a result, we get the 1st row of 24 P, the beginning of which will be at the back.
2 row. (3 SC, İNC)x6 times (30)
3-6 rows. 30 SC – 4 rows
We shift the beginning of the row by several loops in turn, i.e. inco we knit the loops to the left side.
We change the thread to “Iris” PNK named after S.M. Kirov tsv. pink.
7 row. 30 SC knit behind the back walls of the loop so that the transition from trousers to turtleneck is beautiful. But you can also knit in the usual way.
8 row. (3 SC, DEC) x6 times (24) 9-16 rows. 24 SC – 8 rows 17 row. (2 SC, DEC)x6 times (18)
In the next row we will inc join hands. Place your hands straight at your sides.
18 row. İnco knit 4 SC for the loops of the first hand and body, 6 SC for the body, 4 SC for the loops of the second hand and body, 4 SC for the body (18)
Now we take an inco-wire with a length of approximately 55 cm. And we form
doll frame.
We insert the frame into the legs, body and arms. We stuff the body. I did not stuff my legs and arms. But this is at your discretion.
19 row. 16 SC (3 SC in remaining arm sts, 6 SC in body, 3 SC in remaining arm sts, 4 SC in body (16)
20 row. (2 SC, DEC)x4 times (12)
21 row. (2 SC, DEC)x3 times (9)
Neck
We change the thread to Iris “Satta” col. cream.
22-26 rows. 9 SC – 5 rows
Head
27 row. 9 inc (18)
28 row. 18 inc (36)
29 row. (5 SC, İNC) x6 times (42) 30-40 rows. 42 SC – 11 rows
41 row. (5 SC, DEC)x6 times (36)
Next, we will insert the hair and tie the head in parallel. We take incyazhu Iris “batta” col. brown. We cut the thread into inciads with a length of approximately 20 cm.
We mark the borders of the hair fastening on the connected part of the head. The lower the border, the more magnificent e will have hair on the doll.
* Fold the thread (incyad) in half. From the inside of the head, we insert the hook into the hole in the row and grab the inc, inc drag it inward not completely, leaving a loop on the hook. Then we insert the hook into the adjacent hole and grab the next incline, pull it inside and pull it through the loop of the first incline *. We stretch the ends of the first incyadi from the outside. We repeat the operation from * to * with all the incs.
Inserted hair in the bottom row along the border. Now we rise to the top row and fasten the incs, moving in the opposite direction. So we repeat to the last row.
42 row. (4 SC, DEC)x6 times (30)
Next, insert the hair, moving in a circle.
We inserted a row of hair and knit the next row of the head.
43 row. (3 SC, DEC)x6 times (24)
44 row. (2 SC, DEC)x6 times (18)
We change the thread to Iris “batta” tsv. brown. We knit the crown.
45 row. (1 SC, DEC)x6 times (12)
We fill the head with filler.
46 row. 6 DEC
İnco pull the last incyadku. We pull the working thread through it. Cut the working thread along the length of the hair and fasten.
Ears
1 row. 6 SC in an amigurumi ring.
We knit the second ear in the same way as the first.
We cut the thread, leaving a long end for incishing. We tie a knot from the two ends of the thread.
Mark the center of the face with a sewing pin. We fasten the ears to the head, incimerno, in the region of the 34th and 35th rows. İncishivaem ears with one thread, and the other inc inside the head.
Face embroidery
Eyes
We take a thin needle (in my case, a Satta beaded needle) and threads for embroidery in black, white and gold colors. Embroidery thread consists of several thin components. We will embroider in one
component of the thread.
We introduce the needle in the occipital area, and bring it out in the region of the inner edge of the future left eye. Then follow the photo master class.
We bring out the black thread in the occipital zone and do not cut it. She will be with us
needed.
We take a golden thread and continue to embroider.
We take a white thread and continue to embroider.
Next, embroider again with black thread.
I decided to enlarge the pupils a little more.
We embroider the nose with a cream-colored thread, making two stitches in the intended
place.
Embroider eyebrows with brown thread.
We embroider places with red thread.
So our doll is ready. It remains only to knit shoes, a coat and a hat.
Boots
We knit incyazhey “Pekhorka” Openwork, tsv. pink (you can use Iris) a chain of 6 CH.
1 row. From 2nd st from hook 4 SC, 3 SC in 1 st, 3 SC, İNC (12)
2 row. İNC, 3 SC, 3 İNC, 3 SC, 2 İNC (18)
3 row. 1 SC, İNC, 3 SC, (1 SC, İNC)x3 times, 3 SC, (1 SC, İNC)x2 times (24)
4 row. 24 SC behind hinge back walls
We change the thread to knit “Pekhorka” Openwork col. grey.
5-6 rows. 24 sc
7 row. 6SC, 6DEC, 6SC (18)
8 row. 5SC, 4DEC, 5SC (14)
9 row. 14SC
The thread is cut and fastened.
We knit the second shoe in the same way as the first.
Next, using a needle, insert the lace (thread incyazhi “Pekhorka” Openwork, color pink) into the boot.
Coat
We will knit the coat with knitting needles No. 2, incyazh Lige Bayu moo! col. pink. Legend:
persons n – front loop;
izn p – purl loop;
n – nakid.
Cast on 30 stitches. In knitting, remember that the first and last loop are hem. We will knit in rotary rows.
We knit the first 4 rows in stocking stitch (i.e. a row of facial loops, a row of purl loops).
5 row. 6 persons p, n, 4 persons p, n, 10 persons p, n, 4 persons p, n, 6 persons p (34)
6 row. 34 p
7 row. 6 persons p, n, 6 persons p, n, 10 persons p, n, 6 persons p, n, 6 persons p (38)
8 row. 38 p
9 row. 6 persons p, n, 8 persons p, n, 10 persons p, n, 8 persons p, n, 6 persons p (42)
10 row. 42 out p
11 row. 6 persons p, remove on a pin 10 p, n, 10 persons p, remove on a pin 10 p, n, 6 persons p (24)
12 row. 24 p
13 row. 6 persons p, n, 12 persons p, n, 6 persons p (26)
14 row. 26 p
15 row. 6 persons p, n, 14 persons p, n, 6 persons p (28)
16 row. 28 p
17 row. 6 persons p, n, 16 persons p, n, 6 persons p (30)
18 row. 30 p
19 row. 6 persons p, n, 18 persons p, n, 6 persons p (32)
20 row. 32 p
21 row. 6 persons p, n, 20 persons p, n, 6 persons p (34)
22 row. 34 p
Next, knit in stocking stitch to the desired length. We close the loops. The thread is cut and fastened.
Shooting m on the knitting needle of the sleeve loop. Knit 10 rows in stocking stitch. We close the singing. We cut the thread, leaving a long end for sewing the sleeve.
Turn sleeve inside out and sew.
You can sew the sleeve with a needle. I used a hook for this, knitting connecting posts through the edge loops of the sleeve.
We knit and sew the second sleeve in the same way as the first.
Hat
We will knit a hat with knitting needles No. 2, incyazha Pekhorka “Openwork” col. grey. Legend:
persons n – front loop;
izn p – purl loop;
Cast on 36 stitches. In knitting, remember that the first and last loop are hem. We will knit in rotary rows.
Knit 20 rows in stocking stitch.
21 row. * İnco knit two loops behind the front walls, 5 faces p, inco knit two loops behind the back walls *, repeat from * to * 3 more times (28) We will have a Christmas tree.
22 row. 28 p
23 row. *İnco knit two loops behind the front walls, knit 3 p, inco knit two loops behind the back walls *, repeat from * to * 3 more times (20)
24 row. 20 p
25 row. *İnco knit two loops behind the front walls, 1 knit p, inco knit two loops behind the back walls *, repeat from * to * 3 more times (12)
Now with the help of the hook inc we thread the working thread through the remaining loops.
We knit the edges of the cap with single crochets through the edge loops (can be sewn with a needle).
THAT’S ALL
İNCLY KNITTING!
