Hello
The recipe we will share today will be the patchy bear recipe. Dear amigurumi lovers, we share many amigurumi recipes in detail with you.
It is really nice to knit amigurumi animal recipes. The patched bear is a model that you will enjoy knitting. Make sure your kids will have a good time when this pattern is finished. I’m sure everyone would love to knit a patchwork bear. There may be different patchy bear recipes, but I can say that this is the sweetest.
Amigurumi patched bear also helps you instill a love of animals in your children.
Don’t forget to check out our other free recipes.
Content
Preparation of materials and tools for work
Symbols and recommendations for knitting
The process of creating a toy
Head and torso
Front legs
Hind legs
Ears
Tail
Muzzle and nose
Patches
Making and assembling toys
Making paws with seams
İncishivaem hind legs
Front legs
Ears and muzzle
Final design
Preparation of materials and tools for work
This master class does not contain knitting lessons.
Basic crochet skills are assumed.
Difficulty level – below average
İnc using the specified materials, the teddy bear will be about 42 cm in
full height and 30 cm in sitting position
For the bear in this example, the following example was used:
• Pekhorka “Children’s novelty” light begonia 180 (100% acrylic, 200m/50g) –
the main color of the toy. Knitting in one thread. Consumption about 200 g (you will need
approximately 4 skeins per bear).
You will also need a little touch of the following colors:
• Pekhorka “Children’s novelty” lady’s slipper 519 (100% acrylic, 280m/50g).
It will be needed for knitting a spout, patches and soles. Consumption in approximately 25 g (half
skein)
• Pekhorka “Children’s novelty” black 02 (100% acrylic, 200m/50g) – for
stitching, embroidering eyebrows and nose. Any other black incyazha will do
the same thickness.
The indicated colors and brand incyazhi are advisory in nature. Color
bears can be different, according to your desire.
In addition to incyazhi, the following materials and tools will be required:
• The hook is one or two sizes smaller than indicated on the skein of incyazhi (in
In this work, a 1.6 mm hook was used.
• Filler – synthetic winterizer, synthetic winterizer or holofiber. On this bear
it took approximately 400-500 g of synthetic fluff.
• Safety screw eyes – one pair, 9 mm.
• Buttons 2 pcs. – diameter in about 2 cm, preferably with four
holes for attaching paws. It can be used, as they will be incised from the inside.
• Satin ribbon around the neck – optional.
• Tailor’s pins – for preliminary fastening of details.
• Needle – for stitching parts.
• Long needle – for attaching the paws of the bear
• Threads – Incidental sewing threads are required to assemble the parts.
suitable colors. However, you can stitch the details of inc, which is used by inc
knitting toys. In this case, you will need a needle with a large eye or
darning needle.
Symbols and recommendations for knitting
Symbols in the description:
CH – air loop
SC – single crochet
DEC– (decave) inco knit 2 SC together
İNC – (inc) inco knit 2 SC in one loop
The diagrams contain the following symbols:
air loop
single crochet
single crochet column
The text also contains the term amigurumi ring. There are several ways
knit an amigurumi ring, the following option was used for work,
inc shown in the diagram:
Important nuances:
All details are knitted in a spiral, that is, there is no need to make air loops
for lifting. In order not to lose the beginning of each row, inc in such knitting, one should
use marker.
As a marker to mark the beginning of a row, you can use
improvised means, such as a small pin, paper clip or thread
contrasting color.
Knitting in the style of amigurumi should be tight, so it is taken
the hook is one or two sizes smaller than the thickness of the incyazhi.
Knitting inc is for both walls, unless otherwise indicated.
İnc and pressure, it is necessary not to incline the loop, incline the next one.
It is necessary to inc thread both loops and inc knit them together (as in the diagram below).
In this way, unaesthetic holes can be avoided.
The process of creating a toy
Head and torso
The head and body are knitted together, starting with the head. The main
inc pink (or other color of your choice), hook 1.6 mm:
1 row: 6 SC in an amigurumi ring (6)
2 row: in each loop 2 SC (12)
3 row: 1 SC, İNC – repeat 6 times (18)
4 row: 2 SC, İNC – repeat 6 times (24)
5 row: 3 SC, İNC – repeat 6 times (30)
6 row: 4 SC, İNC – repeat 6 times (36)
7 row: 5 SC, İNC – repeat 6 times (42)
8 row: 6 SC, İNC – repeat 6 times (48)
9 row: 7 SC, İNC – repeat 6 times (54)
10 row: 8 SC, İNC – repeat 6 times (60)
11 row: 9 SC, İNC – repeat 6 times (66)
12 row: 10 SC, İNC – repeat 6 times (72)
13 row: 11 SC, İNC – repeat 6 times (78)
14 row: 12 SC, İNC – repeat 6 times (84)
15 row: 13 SC, İNC – repeat 6 times (90)
16 row: 14 SC, İNC – repeat 6 times (96)
17 row: 15 SC, İNC – repeat 6 times (102)
18 row: 16 SC, İNC – repeat 6 times (108)
19 row: 17 SC, İNC – repeat 6 times (114)
20 row: 18 SC, İNC – repeat 6 times (120)
21 row: 19 SC, İNC – repeat 6 times (126)
22-42 row: knit in a circle 126 loops (126)
This is where the pressures begin. It’s time to install safety eyes (on
this bear screw eyes 9 mm). We place the eyes in approximately between 37 and 38
side by side, the distance between the eyes is about 4-5 loops.
We continue knitting:
43 row: 19 SC, DEC – repeat 6 times (120)
44 row: 18 SC, DEC – repeat 6 times (114)
45 row: 17 SC, DEC – repeat 6 times (108)
46 row: 16 SC, DEC – repeat 6 times (102)
47 row: 15 SC, DEC – repeat 6 ra h (96)
48 row: 14 SC, DEC – repeat 6 times (90)
49 row: 13 SC, DEC – repeat 6 times (84)
50 row: 12 SC, DEC – repeat 6 times (78)
51 row: 11 SC, DEC – repeat 6 times (72)
52 row: 10 SC, DEC – repeat 6 times (66)
53 row: 9 SC, DEC – repeat 6 times (60)
54 row: 8 SC, DEC – repeat 6 times (54)
55 row: 7 SC, DEC – repeat 6 times (48)
56 row: inco knit in a circle (48)
Here the head passes into the body, the incs begin. Can be slightly
fill your head with filler.
İnco continue to knit the body. İncibavki amigurumi through two rows:
57 row: 7 SC, İNC – repeat 6 times (54)
58-59 row knit in a circle 54 loops (54)
60 row: 8 SC, İNC – repeat 6 times (60)
61-62 row: knit in a circle 60 loops (60)
63 row: 9 SC, İNC – repeat 6 times (66)
64-65 row: knit in a circle 66 loops (66)
66 row: 10 SC, İNC – repeat 6 times (72)
67-68 row: knit in a circle 72 loops (72)
69 row: 11 SC, İNC – repeat 6 times (78)
70-71 row: knit in a circle 78 loops (78)
72 row: 12 SC, İNC – repeat 6 times (84)
73-74 row: knit in a circle 84 loops (84)
75 row: 13 SC, İNC – repeat 6 times (90)
76-77 row: knit in a circle 90 loops (90)
78 row: 14 SC, İNC – repeat 6 times (96)
79-80 row: knit in a circle 96 loops (96)
81 row: 15 SC, İNC – repeat 6 times (102)
82-83 row: knit in a circle 102 loops (102)
84 row: 16 SC, İNC – repeat 6 times (108)
85-86 row: knit in a circle 108 loops (108)
87 row: 17 SC, İNC – repeat 6 times (114)
88-89 row: knit in a circle 114 loops (114)
90 row: 18 SC, İNC – repeat 6 times (120)
91-103 row: knit in a circle 120 loops (120)
104 row: 18 SC, DEC – repeat 6 times (114)
105 row: 17 SC, DEC – repeat 6 times (108)
106 row: 16 SC, DEC – repeat 6 times (102)
107 row: 15 SC, DEC – repeat 6 times (96)
108 row: 14 SC, DEC – repeat 6 times (90)
109 row: 13 SC, DEC – repeat 6 times (84)
110 row: 12 SC, DEC – repeat 6 times (78)
111 row: 11 SC, DEC – repeat 6 times (72)
112 row: 10 SC, DEC – repeat 6 times (66)
We stop the pressure, leaving a hole for attaching the hind legs.
Since the toy is large, and
I don’t have a needle long enough
(more than 20 cm) to inc sew
body through, leave
hole and do not close all the loops.
The hole is needed to
fasten the hind legs from the inside.
For front paws included
conventional thread fastening, as
they are in a narrower place
torso.
We will return to the decave and stuffing of the torso when they are tied and secured
hind legs. Attaching the hind legs is described in the relevant section on page 17
Front legs
We knit the front paws with a thread of the main color, stuff them in the knitting process:
1 row: 6 SC in an amigurumi ring (6)
2 row: in each loop 2 SC (12)
3 row: 1 SC, İNC – repeat 6 times (18)
4 row: 2 SC, İNC – repeat 6 times (24)
5 row: 3 SC, İNC – repeat 6 times (30)
6 row: 4 SC, İNC – repeat 6 times (36)
7 row: 5 SC, İNC – repeat 6 times (42)
8 – 13 row: knit in a circle 42 loops (42)
14 row: DEC – repeat 6 times; 30SC (36)
15 – 46 row: knit in a circle 36 loops (36)
47 row: 4 SC, DEC – repeat 6 times (30)
48 row: 3 SC, DEC – repeat 6 times (24)
49 row: 2 SC, DEC – repeat 6 times (18)
50 row: 1 SC, DEC – repeat 6 times (12)
51 row: DEC- repeat 6 times (6)
Cut the thread, tighten the hole. Similarly, we knit the second paw.
Hind legs
We start with an oval sole, use incyazhu gold or another
contrasting color:
We knit rows 1-8 according to the amigurumi oval pattern below
Change the thread to the main color. The place where the thread is changed will be considered the “heel”
future paw. We fill the part in the course of knitting.
9 row: 72 SC knit with a light gray thread behind the back wall (72)
10-11 row: knit in a circle 72 SC for both walls (72)
İnc note: İnc in knitting style
amigurumi loops constantly
are displaced, therefore, the beginning of the series
choose visually, by
finding the center of the heel. Should
inc draw a visual line along
oval and find the middle, as in the photo
sincava. The resulting point will become
the beginning of knitting, here you need
fix a special marker for
knitting or contrast thread
colors. Further loop count from
12 rows will be conducted from this place.
12 row: 23 SC, DEC, 22 SC, DEC, 23 SC (70)
13 row: 23 SC, DEC, 20 SC, DEC, 23 SC (68)
14 row: 23 SC, DEC, 18 SC, DEC, 23 SC (66)
15 row: 23 SC, DEC, 16 SC, DEC, 23 SC (64)
16 row: 23 SC, DEC, 14 SC, DEC, 23 SC (62)
17 row: 23 SC, DEC, 12 SC, DEC, 23 SC (60)
18 row: 23 SC, DEC, 10 SC, DEC, 23 SC (58)
19 row: 23 SC, DEC, 8 SC, DEC, 23 SC (56)
20 row: 23 SC, DEC, 6 SC, DEC, 23 SC (54)
21 row: 23 SC, DEC, 4 SC, DEC, 23 SC (52)
22 row: 23 SC, DEC, 2 SC, DEC, 23 SC (50)
23rd row: 23SC, 2DEC, 23SC (48)
24-47 row: knit in a circle 48 SC (48)
48 row: 6 SC, DEC – repeat 6 times (42)
49 row: 5 SC, DEC – repeat 6 times (36)
50 row: 4 SC, DEC – repeat 6 times (30)
51 row: 3 SC, DEC – repeat 6 times (24)
52 row: 2 SC, DEC – repeat 6 times (18)
53 row: 1 SC, DEC – repeat 6 times (12)
54 row: DEC – repeat 6 times (6)
Cut the thread, tighten the hole. Similarly, we knit the second paw.
Ears
We knit the ears of the main knitting
(2 parts):
1 row: 6 SC in an amigurumi ring (6)
2 row: in each th loop 2 SC (12)
3 row: 1 SC, İNC – repeat 6 times (18)
4 row: 2 SC, İNC – repeat 6 times (24)
5 row: 3 SC, İNC – repeat 6 times (30)
6 row: 4 SC, İNC – repeat 6 times (36)
7 row: 5 SC, İNC – repeat 6 times (42)
8-14 row: knit in a circle 42 SC (42)
Cut the thread to a sufficient length.
Fold the ears into a flat shape and
sew the edges.
Tail
1 row: 6 SC in an amigurumi ring (6)
2 row: in each loop 2 SC (12)
3 row: 1 SC, İNC – repeat 6 times (18)
4 row: 2 SC, İNC – repeat 6 times (24)
5 row: 3 SC, İNC – repeat 6 times (30)
6-9 row: knit in a circle 30 SC (30)
We cut the thread, leaving enough
reserve for incishivanie tail.
Muzzle and nose
We knit a muzzle in the form of an oval according to the scheme.
We start with a set of 13 loops of the chain.
From rows 1 to 7, we knit in a spiral with single crochets, incline at the edges of the oval
three loops
From the 8th to the 11th row we do not make any inc, inc we knit the 62 resulting loops along
circle with single crochets.
For a knitted nose, a golden color is used. In this incimer
Pekhorka “Children’s novelty” color – lady’s slipper.
Patches
Square patches can be cut out of felt, or knit a square motif
crochet. I used the same knit as for the sole. We knit two
the same details.
Knitting a square motif is performed according to the scheme:
Making and assembling toys
Making paws with seams
All parts are connected, you can proceed to the assembly and design of the toy.
While the bear is disassembled, it is convenient to arrange the details with stitches. Using
black incyazh, we embroider “scars” on the paws, we make stitches on the soles.
İncishivaem hind legs
We incise the hind legs from the inside. For incency from the inside
the seam of the torso is reinforced with a button. Finished well stuffed hind legs
inc through. For work, I used an incyazh of the main color in two
folds and a long darning needle. We evenly place the paws incimerno on the line
onset of torso pressure.
So that the paw does not seem tight and for greater aesthetics, the needle
is brought out between the loops and carefully inserted into the same hole. inci stitches
this will be inside the paws.
We make a sufficient movement with the needle, for incocity of the connection. tight
we pull the thread to incise the paw to the body.
Helping flat people
We fasten and cut the thread
Fasten the second paw in the same way.
The paws are incish, you can stuff the body and close the loops of the body according to the description.
Body folds (inc continued). We fill with filler in the process
113 row: 9 SC, DEC – repeat 6 times (60)
114 row: 8 SC, DEC – repeat 6 times (54)
115 row: 7 SC, DEC – repeat 6 times (48)
116 row: 6 SC, DEC – repeat 6 times (42)
117 row: 5 SC, DEC – repeat 6 times (36)
118 row: 4 SC, DEC – repeat 6 times (30)
119 row: 3 SC, DEC – repeat 6 times (24)
120 row: 2 SC, DEC – repeat 6 times (18)
121 row: 1 SC, DEC – repeat 6 times (12)
122 row: DEC – repeat 6 times (6)
Cut the thread, tighten the hole. The body of the bear is ready.
Front legs
The front legs are incised through the body. Here you need a long
needle and the same knitting that was used in knitting the bear.
The main thing here is to evenly position the paws and not pull the body too tight.
To avoid tightness in the shoulder area, the needle is also inserted and withdrawn into
in the same place between the loops so that the stitches remain inside.
İncishivaem paws as accurately and accurately as possible, inc having made a sufficient amount
needle movements.
Ears and muzzle
The finished spout is incised
to the muzzle.
More convenient to use
sewing thread suitable
golden color, but can be sewn
golden inc details, from
which the nose is tied.
We neatly and symmetrically incise the muzzle to the head, chrytyk to the eyes. Not
forget to fill the muzzle with sintepuh.
After incishing, we embroider a vertical strip in the center of the muzzle and mouth.
Including nodules in an inconspicuous place, for example, at the junction of incising the muzzle.
Final Design
İncishivaem patches to the head and stomach with threads of a suitable color, make out
edges of patches of black incyazhey. We embroider stitches on the stomach and head.
We make out eyebrows
İncishivaem ears and tail
Teddy bear is ready!