Hello
Dear followers, dear amigurumi lovers, we will knit a new recipe with you again today. The name of our new recipe is little monkey.
This little monkey deserves to be knitted.
You will enjoy knitting the little monkey, which is very cute with its cuteness.
Let’s start knitting…
Materials:
- İncyazha YarnArt Jeans color 03 (milky)
- İncyazha YarnArt Jeans color of your choice as the main one for the monkey
- Some black cotton thread for eyebrows and mouth
- Some white felt for the eyes
- Half decussine for eyes 8 mm
- Filler (holofiber, sintepukh)
- Hook number 2
- Long needle
- Scissors
- Glue moment crystal
You can use any other hook according to your preferences, but in this case, you need to choose a hook that is suitable in size. The size of the toy itself will also change.
İnc using the materials indicated by me, the size of the toy is 25 cm
HEAD.
We begin to knit incyazhey of the main color.
1 row: 6 sc in the amigurumi ring (6)
2nd row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: (3 sc, inc) * 6 times (30)
6 row: (4 sc, inc) * 6 times (36)
7 row: (5 sc, inc) * 6 times (42)
8 row: (6 sc, inc) * 6 times (48)
9 row: (7 sc, inc) * 6 times (54)
10 row: (8 sc, inc) * 6 times (60)
11 row: (9 sc, inc) * 6 times (66)
12 row: (10 sc, inc) * 6 times (72)
13 – 20 row: we knit without changes 72 sc (8 rows)
21 row: knit for! front! hinge wall 72 sc. The thread is NOT cut.
22 row: inc we connect the milky thread and knit 72 sc for! back! loop wall of the 20th row.
23 – 24 row: continue to knit with a milky thread, knit without changes 72 sc (2 rows)
25 row: (10 sc, dec) * 6 times (66)
26 row: (9 sc, dec) * 6 times (60)
27 row: (8 sc, dec) * 6 times (54)
28 row: (7 sc, dec) * 6 times (48)
29 row: (6 sc, dec) * 6 times (42)
30 row: (5 sc, dec) * 6 times (36)
31 row: (4 sc, dec) * 6 times (30)
We begin to fill the head with filler
32 row: (3 sc, dec) * 6 times (24)
33 row: (2 sc, dec) * 6 times (18)
34 row: (1 sc, dec) * 6 times (12)
Fill your head completely
35 row: dec * 6 times
Pull the hole with a needle, cut the thread and sew
RIM
We return to the place where we inc knitted with the main color 72 sc for the front steps of the loops and left the thread.
1 row: 72 sc
2nd row: 5 sc, dec, 15 sc, dec, 20 sc, dec, 15 sc, dec, 7 sc, dec (67)
3rd row: 4 sc, dec, 7 sc, 4 pdc, 4 sc, dec, 7 sc, 4 pdc, 7 sc, dec, 4 sc, 4 pdc, 7 sc, dec, 7 sc (63)
4th row: 5 sc, dec, 2 sc
!Attention!
Rapport: (2 pdc, 1dc, 1 pss2n, 2 ss2n, 1 pss2n, 1 dc, 2 pdc)
2 sc, dec, 2 sc, repeat rapport,
2 sc, dec, 2 sc, repeat rapport,
5 sc, dec, 5 sc(59)
Next 1 sc, 1 ss, close. Leave a long thread for inc.
Muzzle
We knit incyazhey of milky color.
1 row: 14 + 1 ch
2 row: in the second loop from the hook 13 sc, 3 sc in one loop, 12 sc, inc. (thirty)
3rd row: inc, 12 sc, 3inc, 12 sc, 2inc (36)
4 row: 1 sc, inc, 13 sc, inc, (1 sc, inc) * 2 times, 13 sc, inc, 1 sc, inc (42)
5 row: 2 sc, inc, 14 sc, inc, (2 sc, inc) * 2 times, 14 sc, inc, 2 sc, inc (48)
6 row: 3 sc, inc, 15 sc, inc, (3 sc, inc) * 2 times, 15 sc, inc, 3 sc, inc (54)
7 – 10 row: we knit without changes 54 sc (4 rows)
1 sl-st, close, leave a long thread for inc.
Girls! I redrawn the content of the stages a little, because the photos didn’t quite fit))
about how to assemble all the details of the head together I will describe in detail later.
EARS (2 parts)
We knit incyazhey of milky color
1 row: 6 sc in the amigurumi ring (6)
2nd row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5-6 row: we knit without changes 24 sc (2 rows)
You don’t need to fill your ear. We fold the ear into the bottom. For the loops of both sides inco we knit 11 sc. Leave a long thread for incishing.
NOSTRILS (2 parts)
We knit incyazhey of milky color
1 row: 4 sc in the amigurumi ring. The first and fourth sc do not connect!
2nd row: ch 1, turn, 2sc, 2sc in last st (5)
3 row: ch 1, turn, 3 sc, 2 sc in the last loop (6)
Leave the thread for incishing.
The nostril should be in the form of a flat triangle.
TUMMY
We knit incyazhey of milky color
1 row: 6 sc in the amigurumi ring (6)
2nd row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: 1 pdc, 5 dc, 1 pdc, ss
Leave the thread for incishing.
HEAD ASSEMBLY
İncishivaem bezel.
I stitched the needle back behind the last row of the rim. Captured only 1sc. I didn’t tighten it too much so that there were no waves along the edge. Places where inco tied ss2n slightly inc pulled towards the center. This makes it more expressive.
I put the filler in the muzzle. We arrange it as follows. The upper part of the muzzle should cover the place where we closed the loops of the head. The rest of the cincava, on the left and below, should cinc with the rim. We incise.
Cut out two semicircles from white felt and glue them over the muzzle. On top, glue half a decushin. I have them 8 mm. Glue I use “Moment Crystal”.
Now we incise the nostrils. These little triangles need to be centered on top of the muzzle. They should almost touch one of the sides and form small tunnels.
We incise the ears on the sides of the muzzle, placing them in a semicircle.
We take a black thread and embroider the eyebrows and mouth.
BODY
We knit incyazhey of the main color
1 row: 6 sc in the amigurumi ring (6)
2nd row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: (3 sc, inc) * 6 times (30)
6 row: (4 sc, inc) * 6 times (36)
7 row: (5 sc, inc) * 6 times (42)
eight
row: (6 sc, inc) * 6 times (48)
9 – 14 row: we knit without changes 48 sc (6 rows)
15 row: (6 sc, dec) * 6 times (42)
16 row: knit without changes 42 sc
17 row: (5 sc, dec) * 6 times (36)
18 row: knit without changes 36 sc
19 row: (4 sc, dec) * 6 times (30)
20 row: knit without changes 30 sc
We begin to fill the body with filler
21 row: (3 sc, dec) * 6 times (24)
22 row: we knit without changes 24 sc
23 row: (2 sc, dec) * 6 times (18)
24 – 25 row: we knit without changes 18 sc
1 ss, leave a long thread. Fill in the rest of the body.
İncishivaem torso to the head.
The seam should not go over the muzzle. We incise half of the neck, add filler, incise the rest.
Girls, the head is slightly heavier than the torso, so your monkey may already start to flirt by tilting its head a little.
İncishivaem belly.
TAIL
We knit with the main color incyazhi.
We fill the tail in the course of knitting. We put a little filler so that the tail is soft and bent)
1 row: 6 sc in the amigurumi ring (6)
2nd row: 6 inc (12)
3 – 10 row: we knit without changes 12 sc (8 rows)
11 row: dec, 10 sc (11)
12 row: we knit without changes 11 sc
13 row: dec, 9 sc (10)
14 – 33 row: we knit without changes 10 sc (20 rows)
1 sl-st, leaving a long thread for inc.
HANDLES (2 parts)
We knit incyazhey of milky color.
We fill the handles in the course of knitting. We put a little filler so that they are soft and bend)
1 row: 6 sc in the amigurumi ring (6)
2 row: inc * 6 times (12)
3 row: (2 sc, inc) * 4 times (16)
4-5 row: knit without changes 16 sc (2 rows)
6th row: 6 sc, dec, 1 sc, dec, 5 sc(14)
7 row: 14 sc (14)
8 row: 5 sc, dec, 1 sc, dec, 4 sc (12)
Change the color to the main color incyazhi monkeys
9 – 11 row: we knit without changes 12 sc (3 rows)
12 row: 4 sc, dec, 1 sc, dec, 3 sc (10)
13 – 24 row: we knit without changes 10 sc (12 rows)
We fold the hole in two, inco knit 4 sc. Leaving the thread
LEGS (2 parts)
We knit with the main color incyazhi 4 + 1 ch.
1 row: 3 sc, 3 sc in one loop, 2 sc, inc (10)
2 row: inc, 2 sc, 3inc, 2 sc, 2inc (16)
3 row: 1 sc, inc, 3 sc, inc, (1 sc, inc) * 2 times, 3 sc, inc, 1 sc, inc (22)
4 row: 2 sc, inc, 4 sc, inc, (2 sc, inc) * 2 times, 4 sc, inc, 2 sc, inc (28)
5 – 7 row: we knit without changes 28 sc (3 rows)
8 row: 9 sc, (dec, 2 sc) * 2 times, dec, 9 sc (25)
9 row: 9 sc, (dec, 1 sc) * 2 times, dec, 8 sc (22)
10 row: 6 sc, (dec, 1 sc) * 3 times, dec, 5 sc (18)
11 row: 18 sc
We start to fill the leg
12 row: 8 sc, dec, 8 sc (17)
13 row: 17 sc
14 row: 8 sc, dec, 7 sc (16)
15 – 24 row: we knit without changes 16 sc (10 rows)
We fill the legs, leaving a little free space.
We fold the hole in the wrong places, knit 7 sc. We leave the thread for incishing.
ASSEMBLY
İncishivaem legs at the level of the center of the belly.
We retreat 2 rows from the head and incise the handles.
The tail will sit in the center between the legs.