Hello our dear followers.
We are adding a new one to the Amigurumi recipes. We have prepared the Amigurumi soft-eared rabbit pattern recipe for you. We hope you will have a pleasant time knitting this recipe.
This description includes a full description of the process of knitting toys, intermediate photos
details, description of panama and crocheted overalls and
calculation of loops for a dress and beret with knitting needles.
The bunny is knitted in the spiral (unless otherwise indicated),
upwards. The upper paws and ears are knitted, the head
pulled out of the body.
When using the specified materials, the height
finished toy about 18 cm.
* To mark the beginning of the row, use a special marker or thread
contrasting color.
Required materials and tools:
1. Hook suitable for your yarn.
2. YarnArt JEANS yarn of any color of your choice for the body.
3. For ears, you can take any textured yarn suitable, or
contrasting color. I knitted bunny ears from cotton-grass from Camtex, from Alize Softy, Adelia Sofia
4. Filler.
5. Eyes on a secure mount (I used 8 mm) or sewn on, (beads, half beads – your choice)
6. A little black thread for embroidering the muzzle.
7. Stitching needle, scissors, pins, knitting marker.
Legend:
KA – amigurumi ring
sc – single crochet
ssn – single crochet
vp – air loop
pr – increase
ub – decrease
ss – connecting column
(…)*X – repeat X times indicated in brackets
the number after the = means
number of stitches in a row
EARS (2 parts)
Knit in swivel rows. From “Cotton Grass” by
“Kamteks” and “Adelia Sofia” I knitted with single crochets.
From “Alize Softy”, with single crochets. Different textured yarns often in different thicknesses, increase up to
ear width is about 3.5-4 cm according to this principle:
Chain of 3 v / p + 1 lifting loop for the eye of the posts
single crochet or 2 lifting loops for an eyelet from columns with
with one throw.
Next, we make in each row one increase from each
sides of the row to the width we need. I have it either 7,
or 9 columns (depending on the thickness of the thread).
We knit in rotary rows until the length of the ear is 13.5-14 cm,
decrease 1 loop on each side of the row in each row until 5 columns remain.
UPPER LEGS 2 parts
We stuff only the bottom part a little
1 row: 6 sc in KA
2nd row: 6 pr. = 12
3-17 rows: 12 sc
Fold in half and knit
together 5 sc.
LEGS, BODY, HEAD
Stuffing Enough
tightly, in the course of knitting.
We start with the LOWER LEGS:
1 row: 6 sc in KA
2nd row: 6 pr. = 12
3 row: (3 sc, inc) * 3 = 15
4-12 rows: 15 sc.
At the first foot, knit the last column in the 12th row
connecting, fasten and cut the thread.
We do not cut the thread at the second foot, we continue knitting, connecting 5 sc with the first foot.
This is where the BODY begins.
13 row:
15 sc on the first leg, 5
sbn in a chain,
15 sc on the second leg, 5
sbn in a chain.
The total number of stobics in
this row = 40
Next, visually determine the sides of the toy. Can
mark with markers. We will do in some rows one increase or decrease.
14 row: one pr on the sides = 42
15 row: one pr on the belly and pope = 44
16-21 rows: 44 sc
22 row: one kill on the sides = 42
23 row: 42 sc
24 row: one kill on the sides = 40
25 row: one kill on each side = 38
26 row: one kill on each side = 36
27 row: one kill on each side = 34
28 row: one kill on each side = 32
29 row: one kill on each side = 30
30 row: (3 sc, dec) * 6 = 24
31-34 rows: 24 sc
in the 34th row, the upper paws are knitted.
The paws are knitted parallel to the lower ones (5 sb each with
paws, between them 7 sc)
35 row: (2 sc, dec) * 3 = 18
36 row: (1 sc, dec) * 3 = 12
HEAD starts
37 row: 12 increments for the front half loops = 24
This technique will give us a more rounded shape of the lower
parts of the head.
We put eyes between 45 and 46 rows, between eyes 9
columns
38 row: (3 sc, inc) * 6 = 30
39 row: (4 sc, inc) * 6 = 36
40 row: (5 sc, inc) * 6 = 42
41 row: (6 sc, inc) * 6 = 48
42 row: (7 sc, inc) * 6 = 54
43-53 rows: 54 sc
54 row: knit ears
I mark with pins
loops in parallel
eyes and count from them to the back of the head
right amount
columns, the same
on both sides to the place where the ears will be located. I have
this is 8-9 sc. Wherein
don’t forget about 5
the columns of the ears themselves.
55 row: (7 sc, dec) * 6 = 48
56 row: (6 sc, dec) * 6 = 42
57 row: (5 sc, dec) * 6 = 36
58 row: (4 sc, dec) * 6 = 30
59 row: (3 sc, dec) * 6 = 24
60 row: (2 sc, dec) * 6 = 18
61 row: (1 sc, dec) * 6 = 12
62 row: 6 dec = 6
Close. tsa 8 out of 12
It remains to embroider the nose,
eyelashes, mouth, eyebrows
(to your taste) and dress
bunny at your discretion.
We knit the tail at will, from textured yarn or make a pompom.
I knit them dresses and berets with knitting needles, panama
and crochet jumpsuit.
OVERALLS
I used ALIZE Cotton Gold yarn. We start knitting with trousers, then we connect them. We knit not tight,
spirals unless otherwise noted.
We collect a chain of 16 air loops, close in
ring.
1-2 rows: 16 sc
3 row: (3 sc, inc) * 4 = 20
4 row: 20 sc
5 row: (4 sc, inc) * 4 = 24
6 row: 24 sc
7 row: (5 sc, inc) * 4 = 28
8 row: 28 sc
Fasten the thread to the first leg, cut it off. At the second
we do not cut the thread of the legs, we continue knitting, connecting with the first leg with 2 air loops.
9 row: 28 sb on the first leg, 2 sb on the chain
28 sbn on the second leg, 2 sbn on the second side
chains.
The total number of loops in this row = 60
10-23 rows: 60 sc
24 row: (8 sc, dec) * 6 = 54
25 row: (7 sc, dec) * 6 = 48
26 row: (6 sc, dec) * 6 = 42
27 row: 42 sc
Knit straps as desired.
For my bunny turned out
from 20 air loops.
Returned along the chain to
back, leaving a few loops untied
for a button. The second knitted in the same way.
Breast knitted width 9
sbn, turning rows
to the desired height.
PANAMA
I used YarnArt Jeans. We start knitting from the crown, then in a spiral. We knit not tight or
take a hook a little more. Focus on
to your toy, try on panama in the process of knitting,
increase (or decrease) the number of increments
to your liking.
1st row: 6 sc in KA = 6
2nd row: inc * 6 = 12
3 row: (pr., 1 sbn.) * 6 = 18
4 row: (2 sbn., Ave.) * 6 = 24
5 row: (pr., 3 sbn) * 6 = 30
6 row: (2 sbn., pr., 2 sbn) * 6 = 36
7 row: (4 sbn, pr., 1 sbn.) * 6 = 42
8 row: (6 sc, pr.) * 6 = 48
9 row: (pr., 7 sbn) * 6 = 54
10 row: (2 sbn, pr., 6 sbn) * 6 = 60
11-22 rows: 60 sc.
23 row: (4 sbn, pr., 5 sbn) * 6 = 66
24 row: (6 sbn, pr., 4 sbn) * 6 = 72
25 row: (8 sbn, pr., 3 sbn) * 6 = 78
26 row: (10 sbn, pr., 2 sbn) * 6 = 84
We form the folding edge of the panama:
27-28 rows: 84 sc
Finish knitting, fasten, cut and hide
a thread. Decorate to your taste. I decorated it with roses.
The rim was knitted in rotary rows of 6 sbn for the back
half loops, closed in a ring. The junction was closed with roses.
For a large rosette, I dialed 12 v / p, returned by
chain of 3 dc in each loop.
For a small rose, I scored 10 v / p, returned
in a chain of 3 sc in each loop.
The flowers were folded, sewn with a needle and attached to
rim. I did not sew the rim to panama.
For a handbag, I scored 10 v / p, in the first row in the extreme
loops of 3 sc, then knitted in a spiral to the desired
me size. The handle is from an ordinary chain in / p, trying on the length.
Knitted dress and beret I knit hosiery
viscous, from “Children’s
novelties” from “Pekhorka” or “Karamelka”
from “Kamteks”
Dress: spokes No. 2
raglan on top of 22
loops on the neck
(edge, 2 loops per shelf, 3 per
sleeves and 6 on the front)
Rows with increments up to 54 loops. middle loops between
I knit in increments in front and back. On a skirt
increase in each loop and turn to 5 knitting needles in a circle and knit to the desired length.
Beretik: rubber band (1×1
or 2×2) of 40 loops,
round, on hosiery
knitting needles number 2. Then stocking knit, increase in each loop. After a row with increments,
to the desired depth. IN 2-
x last rows decrease every 2 loops, tighten, fasten.